BRESSER Bioscience 40-1000x Trinocular Microscope

The Researcher Trino offers observing fun for an unbeatable price. Based on a solid metal body and equipped with DIN eyepieces and objectives, this transmission-type microscope fulfils even professional demands with its optical and mechanical quality. Many details, for example the cross table for optimal object positioning or the focuser with coarse and fine drive for dead-sharp images. Instead of a binocular head, the Trino Researcher has a trinocular head. With this equipment, the observer can make binocular obseravtions and - at the same time! - take photographs or use a PC eyepiece Features Type: Biological microscope View: Trinocular Application range: Biology, Education, Teaching, Imaging Solutions, Botany Illumination: LED with dimmer Level: Intermediate, Expert Warranty: 2 years Double-lens condensor with iris diaphragm Incl. mechanical stage Adjustable eye relief Specifications Comfortable binocular view, 360° turnable head Magnifications: 1000x, 400x, 100x, 40x Illumination: LED Eyepieces: 10x Eyepiece diameter: 23.2 mm Objectives: 4x, 10x, 40x, 100x (oil immersion) Power supply: 220/240V Included Accessories 4 DIN-objectives 2 eyepieces Mechanical stage Condensor Trinocular head

The New BRESSER Science Infinity is the new top of the range of the biology microscope series by BRESSER. It is based on infinitely corrected planachromatic objective lenses with superb image quality. Because of the modern design and optics the installation of accessories is very simple and one has many options. The WF 10x eyepieces offer a large visual field of 22mm and are also suitable for spectacle wearers. For protection purposes the eyepieces are rubber coated. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The bright and durable LED illumination is dimmable and also very practical for darkfield microscopy*.The Full Köhler illumination is adjustable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationplanachromatic objectives, infinity corrected (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterManualImmersion oilDust cover*only with optional accessories

The BRESSER TRM-301 is a trinocular biological microscope of first-class quality: This means excellent imaging, good ergonomy, high stability and a modern attractive design. It is a laboratory microscope, which permits an intensive use, e.g. in medicine, biology, agriculture and industry area. Also, we can recommend it to the engaged hobbyist as his "microscope for a lifetime". A particular important feature of the TRM-301 is its ability for the Köhler illumination. This optimal illumination is bright, cool (going easy on the object), homogenous, reflex free and rich in contrast, so it makes the full use of the microscope optics. The Köhler illumination is standard for scientific research and microphotography. It is achieved with the fixed field diaphragm and the adjustable Abbe condenser (numerical aperture 1.25; with iris diaphragm). Naturally, the TRM-301 has the other features, which are typical for high-quality microscopes: lengthwise and cross moveable stage, ergonomic coaxial focusing knobs (fine focus: 200 µm / full turn), continous dimmer, planachromatic objectives (4x, 10x, 40x, 100x-oil retractable), 10x wide field eyepieces (mounted in 30° inclined eyepiece tubes), adjustment of eye relief, diopter adjustment and the phototube. FEATURESbiological microscopetype head: trinocularmagnification: 40x - 1000x2 eyepieces: both WF 10x (23mm)4 objectives: 4x, 10x, 40x, 100x oiltype objectives: planachromaticcondensor: Abbe N.A. 1.25illumination: 12V / 30W halogen with dimmerSCOPE OF DELIVERYMicroscope2x Eyepiece (WF 10x)4x Objective ( PL4x, PL10x, PL40x, PL100x oil)Coxial mechanical stage with Nonius scaleimmersion oildust coverpower cable

The New BRESSER Science TFM-301 is a trinocular microsscope, which is equipped with semiplan objectives. In addition to the binocular viewing pictures can also be made via the trinocular tube with C mount thread. The WF 10x eyepieces offer a large visual field of 20mm. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The Köhler illumination is regulable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationsemiplan objectives (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterMains adapterManualImmersion oilDust cover

In the microscope's basis, there are a transmitted light halogen illuminator (20 W) as well as the power supply and the continuous adjustable dimmers for reflected light and transmitted light. The trinocular head attachment works with both illumination modes. It also allows photography and binocular visual observation. The inclination of the eyepiece tubes is 30°. With the polarization head attachment, the instrument is suitable for the internal structure of materials and for condition monitoring of different mechanical apparatus in college and factory. The reflected light halogen illumination (20W), which goes through the objective onto the object, can be modified for special purposes with a colour filter wheel and the polarizer/analyzer combination. The Science ADL 601P is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF16x), the dividing eyepiece (WF10x), different planachromatic DIN objectives (e.g. 4x, 5x, 10x, 20x, 40x retractable, 60x retractable, 100x-oil retractable), the Abbe condenser (numerical aperture 1,25; with iris diaphragm and auxiliary lens), dark field condensers (dry and oil), immersion oil and phase contrast set.  Features • Type: Biological microscope • View: Binocular • Application range: Biology, Gemology, Mineralogy, Botany • Illumination: Halogen • Level: Intermediate, Expert • Warranty: 2 years • 1.25 Abbe-condenser with iris diaphragm and filter holder • Incl. adjustable mechanical stage • Integr. dimmer • Adjustable eye relief • Diopter adjustment Specifications • Comfortable binocular view, 30° inclined • Transmitted 6V/20W, adjustable • Magnifications: 40x-600x • Eyepieces: 2x WF10x • Eyepiece diameter: 23.2 mm • Objectives: PL-5x, PLL-10x, PLL-40x, PLL-60x • Power supply: 220/240V Included Accessories • 4 DIN-objectives • 2x 10x eyepieces • 1.25 Abbe-condenser with iris diaphragm and filter holder • Polariser-/Analyser-Attachment • Additional Halogen-Incident-Illumination for Polarisation

The BRESSER Science MTL 201 is a special reflected light microscope, which allows to observe non-transparent surfaces at higher magnifications (50x-800x). This solid designed instrument is ideal for working in metallography (e. g. microscopy of polished samples of metals or alloys), mineralogy, precision engineering and electronics. It is suitable for scientific research, teaching demonstration and industrial production (e.g. quality controlling). According to its purposes, the MTL 201 is equipped with a large stage (250 mm x 230 mm), which can be moved coarsely by a quick adjustment lever and finely by a transverse and a longitudinal knob. The focuser has coarse and fine drive (coaxial; circa 70 µm/ full turn). The illumination is done by a halogen lamp (20 W) with a dimmer. The light comes through the objective from above onto the sample. There are a field diaphragm, which can be centered, some filters (yellow, green, blue, ground glass) and a polarizer/analyzer combination. The fivefold nosepiece is equipped with planachromatic DIN objectives (5x, 10x, 20x, 40x, 80x). The trinocular head bears two 30° inclined ocular tubes and the photo tube. The oculars (with 10x wide field lenses) have diopter and eye relief adjustments. The photo tube allows for digital imaging, e. g. with an optional available PC eyepiece. Further optional accessories: Eyepiece (WF16x), dividing eyepiece (WF10x), planachromatic objective (50x). FEATURESType: Metallurgical microscopeView: Trinocular Comfortable binocular view, 30° declinedApplication range: Metallurgy, Mineralogy, Research, Laboratory, Quality inspection, Quality inspectionIllumination: Halogen Transmitted 12V/30W, adjustableLevel: Intermediate, ExpertWarranty: 2 yearsIntegr. dimmerGenerously dimensioned object plateAdjustable eye reliefDiopter Adjustment SCOPE OF DELIVERYMicroscopeEyepieces (2x WF 10x)Objective lenses (5x, 10x, 20x, 40x, 80x)Coaxial stageColour filters (green, blue, yellow, matt)Dust coverPower cable

In the microscope's basis, there are a transmitted light LED illuminator (3 W) as well as the power supply and the continuous adjustable dimmer for transmitted light. The trinocular head allows to mount a SLR camera or a USB microscope camera with an optional adapter. The inclination of the eyepiece tubes is 30°. The fluorescence attachment includes a special LED wheel with four different lamps (green, blue, violett, ultraviolett), a filter wheel and a radiation shield. The LED lamps produces the exciting radiation in order to get fluorescence. Fluorescence microscopy is done e. g. in biology, medicine, microchemistry, geology, semiconductor production and environmental protection. The Science ADL 601F LED is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF15x), the dividing eyepiece (WF10x), and dark field condensers (dry and oil). FEATURESType: biology MicroscopeView: TrinocularApplication range: Biology, Gemology, Botany, Education, Teaching, Entomology, Forensic, Research, Laboratory, Medical science, Pathology, Veterinary medicineIllumination:  LEDLevel: Intermediate, ExpertWarranty: 2 years1.25 Abbe-condenser with iris diaphragm and filter holderIncl. adjustable mechanical stage Integr. dimmerAdjustable eye reliefDiopter adjustment SCOPE OF DELIVERYMicroscope4 DIN-objectives (PL 4x, PL 10x, PL 100x oil, PL-FL 40x)2x 10x eyepieces 1.25 Abbe-condenser with iris diaphragm and filter holderFluorescence attachment with LED wheel (green, blue, violett, ultraviolett) and respective emission filtersImmersion oilFull Koehler illumination for transmitted light

In contrast to usual light, polarized light has a preferred vibration plane of the light waves. Polarized light lets be seen anisotropic objects, whose observable properties are depending on the direction, "in a new light": crystals, but also animal hairs, feathers, muscles, nerve fibres and vegetable cell walls, which have a preferred direction of its biomolecules, show structures now, which were hidden in the normal bright field image. Images made by polarized light are often characterized by a fantastic coloring. Polarization microscopes are used particularly in mineralogy, geology, biology and medicine. In order to change the object's direction in a controlled way, the Science MPO 401 has a round, center-adjustable and full rotatable object stage with degree scale. The illumination and observation unit encloses e. g. the halogen bulb lamp (20 W) with dimmer, the field diaphragm (used to achieve the Köhler illumination), the 360° rotatable polarizer (for the production of polarized light), centering implements for the objectives and the analyzer attachment (for the analysis of the polarized light). The analyzer attachment is meant for receiving the 360° rotatable analyzer and optional available sliders (Bertrand lens for conoscopy; quartz wedge, lambda plate and lambda/4 plate used in order to get special colour effects). The wide field eyepieces (WF10x), which are also optional available, are placed at the trinocular head with an inclination of 30°. They have eye relief adjustment as well as diopter adjustment. The images shown by them are bright, true colored, sharp and rich in details. Apart from the slips and eyepieces, which were mentioned above, the accessories of the MPO 401 contain a dividing eyepiece (WF10x), the Abbe condenser with iris diaphragm, special polarization objectives (4x, 10x, 40x retractable, 100x-oil retractable), filters (blue, ground glass) and immersion oil. SCOPE OF DELIVERYmicroscope2x WF10x eyepieces 4 DIN-objectives (PL4x, PL10x, PL40x, PL100x oil)360° rotatable mechanical stage phasen shifter Amici Bertrand lenspolarizer/analyzer combinationdust coverpower cable

At the BRESSER Science IVM 401, the usual direction of illumination and observation is inverted: One illuminates the sample from above and observes it from below. This type allows for the microscopy of sediments and transparent living organisms, which are found at the bottom of a liquid medium. For example, plankton or protozoa at the ground of culture bottles, which should not turned over, can be investigated. So, this special microscope is suitable for public water departments, research institutes and universities, for medical treatment, animal husbandry, agriculture, limnology etc. The Science IVM 401 has a large fixed object plate with stage moving system, a powerful halogen bulb illumination (30 W) with dimmer and field diaphragm, and a fourfold nosepiece. The trinocular head is turnable and bears 30° inclined eyepiece tubes and a photo tube. There are eye relief adjustment and diopter adjustment, as well as coaxial coarse and fine focusing knobs. As accessories, which are available on request, you have a big choice: Wide field eyepieces (WF10x, WF16x), planachromatic DIN objectives (10x, 25x, 40x), planachromatic DIN phase contrast objectives with annular diaphragm (10x, 25x, 40x), condenser (working distance 30 mm; with phase contrast), condenser (working distance 70 mm), different filters (blue, green, ground glass) and specimen holders for rectangular or round culture utensils. FEATURESType: Inverted microscopeView: TrinocularApplication range: Biology, Research, Laboratory, Medical science, Education, Teaching, Veterinary medicine, Agriculture, Limnology, In vitro fertilisationIllumination: Halogen Level: Intermediate, ExpertWarranty: 2 years1.25 Abbe-Condenser with Iris diaphragm and filter holderIncl. adjustable mechanical stage Integr. dimmerAdjustable eye reliefDiopter adjustment  SCOPE OF DELIVERYMicroscope4 DIN PL-L plan-achromatic objectives: 10x, 10x PHP, 25x, 40x2x WF10x eyepieces 1.25 Abbe-Condenser with Iris diaphragm and filter holderdust coversField diaphragmpower cable

The NIB 630 is the flagship of the NIB600 series of inverted microscopes. With such an inverted design, the device enables the microscopy of plankton, microalgae and cell cultures. Cell cultures can be examined directly in the culture vessel without taking samples. For particularly easy sample handling, it is equipped with a tiltable lighting unit. This means that even tall vessels can be placed comfortably without bumping against the lighting unit. The microscope head is equipped with a height-adjustable ergo viewing head. This allows users of different heights to adjust the microscope to a comfortable and ergonomic viewing height with a single hand movement. This special microscope is used in water management offices, research institutes and universities, in human and veterinary medicine, agriculture, marine biology, limnology, aquaculture and many more. The integrated display informs you at any time about the selected magnification and the status of the illumination as well as the ECO mode. The brightness can be programmed for each objective so that there is no need to readjust when changing magnification and the user is not blinded. OBJECTIVE The NEXCOPE NIB630 microscope is equipped with a quintuple nosepiece. A 4x planachromatic objective and one each of 10x, 20x and 40x planachromatic phase contrast objectives are included. The condenser has a numerical aperture of 0.3 and an extra long working distance. The objectives are calculated for a soil thickness of 1.2 mm. Please use appropriate culture vessels. The universal specimen holder is suitable for standard slides. EYEPIECES The eyepieces have a field of view of 22 mm. This gives you a very large field of view. The high eye point makes them very comfortable even for spectacle wearers. A rubber edge protects against scratches on contact. Dioptric compensation from -5 to +5 can be individually adjusted for each eyepiece. The interpupillary distance can be adjusted between 48 mm and 75 mm. The binocular can be tilted up and down to adjust the viewing height. ILLUMINATION The Koehler illumination provides the best possible light guidance of the microscopy light. This avoids stray light and only illuminates the just visible area in the specimen. This protects sensitive living specimens from excessive light irradiation. The powerful 3W LED can be adjusted in brightness and ensures optimal illumination. The brightness can be adjusted individually for each objective. If an objective is changed, the NEXCOPE NIB630 automatically adjusts the previously set brightness. The display shows the currently selected lens and the current brightness. The tiltable lighting unit makes it easier to work with taller sample vessels. The adjustable condenser with extra-long working distance enables quick readiness for use. MECHANICS In addition to coarse focusing, fine focusing helps to bring the specimen into focus very precisely. A full turn of the fine focusing knob moves the stage up or down by 0.2 mm. On the right side, the fine focus can be adjusted with a finger. The friction of the coarse focusing can also be varied. The fine focusing knobs are held magnetically and can be mounted on the left or right. The XY stage offers the possibility of inserting various holders. This allows slides or even petri dishes to be inserted. CAMERA CONNECTION The NEXCOPE NIB630 is specially designed for use with C-mount cameras. The camera connection is located on the side and has a switch between visual observation and camera (100/0 or 0/100). You can choose from two different adapters, depending on the sensor size: 0.5x C-mount adapter 1x C-mount adapter (already included in the scope of delivery) ACCESSORIES (optional) Hoffman Modulation Contrast Relief 3D contrast Terasaki holder, Petri dish holder 54 mm and 90 mm Camera adapter for C-mount 0.5x FEATURES Professional inverted transmitted light microscope Type of objectives: infinity plan achromatic (60 mm adjustment length, M25) Precise mechanics Very bright illumination SCOPE OF DELIVERY Inverted transmitted light microscope 4x objectives, of which 10x, 20x and 40x as phase contrast objectives Filter slider for phase contrast Universal sample holder Centering telescope for phase contrast

I​nverted microscopes are used for observing cell cultures. The NEXCOPE NIB610 is particularly suitable for this purpose and is very user-friendly and easy to handle. Like all devices of the NIB600 series, the microscope is also prepared for use in sterile workbenches (Clean Bench, Laminar Flow). The UV-resistant coating ensures that the workstation can be sterilised with UV light without any problems. Using an inverted microscope, the sample is illuminated from above and viewed from below through the bottom of the sample vessel. With such an inverted design, the device enables the microscopy of plankton, microalgae and cell cultures directly in the culture vessel without opening the vessel. For example, cell cultures can be observed in so-called 96-well (Terasaki) plates, Petri dishes or special slides with attached wells. The sample does not have to be covered, and the thickness of the layer is also insignificant.Accordingly, this special microscope is used in research institutes and universities, in veterinary medicine, agriculture, marine biology, limnology, aquaculture, etc.OBJECTIVESThe NEXCOPE NIB610 microscope is equipped with a quintuple nosepiece. A planachromatic 4x objective, as well as a 10x, 20x and 40x planachromatic phase contrast objective are already included in the scope of delivery. The objectives are designed for sample vessels with a base thickness of 1.2 mm. This means that standard slides or plates that rest on standard slides can also be used.EYEPIECESThe eyepieces have a large field of view of 22 mm. The high field of view makes them very comfortable even for spectacle wearers. A rubber cup protects against contact. A diopter compensation from -5 to +5 can be set individually for each eyepiece.The interpupillary distance can be adjusted between 48 mm and 75 mm.ILLUMINATIONThe powerful 3W LED can be adjusted in brightness and provides optimal illumination.The adjustment-free condenser allows for quick readiness for use. The phase contrast adjustment is also preset and does not need to be changed when changing magnifications.MECHANICSIn addition to coarse focusing, fine focusing helps to bring the object into focus very precisely. A full turn of the fine focusing knob moves the stage up or down by 0.2 mm. On the right side, the fine focus can be adjusted with a finger. The tension of the coarse focusing knob can be adjusted as desired. The fine focusing knobs are held magnetically and can be set to the left or right, as required. The cross stage offers the possibility of inserting various specimen holders (optional). Thus, slides, 96-well cell culture plates or Petri dishes can be inserted. The microscope can also be operated without a stage. This provides a very large, flat surface, e.g. for larger culture flasks or stacks. If the condenser is removed, a working distance of 187 mm is achieved.CAMERA CONNECTIONThe NEXCOPE NIB610 is specially designed for use with c-mount cameras. C-mount adapters (1x and 0.5x) are available.ACCESSORIES (optional)Hoffman Modulation Phase ContrastRelief 3D ContrastSample holder (Universal holder, Terasaki holder, Petri dish holder (54 mm and 90 mm)PROPERTIESProfessional inverted transmitted light microscopeType of objectives: Planachromatic (60 mm adjustment length)Precise mechanicsVery bright 3W LED illuminationSCOPE OF DELIVERYNIB610 Inverted microscope with quintuple nosepiece4x Objectives (10x, 20x, 40x with phase contrast), 4x as bright field1x Universal phase contrast slider1x Universal holder1x Centering telescope (CT)2x Spare fuses1x C-mount photo adapter1x Hexagonal screwdiver1x Dust cover

The NEXCOPE NE930 microscope offers excellent optical performance and ease of use, and is ideal for scientific tasks. Thanks to its cutting-edge optical quality, it is ideal for science and research applications, as well microbiological quality control or diagnostics. LENSES The panchromatic lenses ensure a flat field of view. The backwards-tilted, motorized 6x nosepiece is equipped with high-quality infinity lenses (4x, 10x, 20x, 40x, 100x oil). These feature an M25 thread and a parfocal length of 60 mm. The 40x and 100x lens has a spring-loaded protection mechanism. EYEPIECES The ergonomic eyepiece head can be tilted between 0° and 35°. This allows the microscope to be adjusted to the user’s seating position. The eyepieces’ large 25 mm field of view allows you to view a very wide area. The high eyepiece head is ideal for spectacle wearers. A rubber edge provides protection upon eye contact. A dioptre compensation of -5 to +5 can be set individually for each eyepiece. The interpupillary distance can be adjusted between 47 mm and 78 mm. ILLUMINATION The powerful 3 W LED has an adjustable brightness and provides optimal illumination. The brightness can be adjusted individually and saved for each lens. The swing-top condensor is automatically adjusted to the selected lens. MECHANICS + AUTOMATION The large XY stage features a robust, chemical-resistant insert made from Gorilla Glass and is moved via a combination of a toothed rack drive and a wire rope hoist. This enables exact positioning for high magnifications. The height of the control knobs can be adjusted to ensure an ergonomic setup. The tension can also be adjusted. Specimens can be conveniently changed with one hand. In addition to the coarse focus, the fine focus helps to render a very sharp image of the object. A full turn of the fine focus moves the table by 0.2 mm. The fine focus can be adjusted with one finger on the right-hand side. The table height limit helps to protect the specimens. The friction of the coarse focus can also be adjusted. The fine focus knobs are held in place magnetically and can be replaced as needed. The lenses are switched via a motor at the touch of a button. The next lens can be moved via a selection switch, or a specific lens can be selected on the front panel. The illumination and the position of the condensor is automatically adjusted to the selected lens. These features ensure ergonomic, fatigue-free and efficient performance. The exact reproducibility of the settings also offers advantages for photomicrography, as the images do not need to be recalibrated / flats do not need to be reproduced each time the lens is changed. CAMERA CONNECTION The NEXCOPE NE930 is specially designed for use with C-mount cameras. You can choose from two different adapters, depending on the sensor size and desired field of view: 0.5x c-mount adapter for sensor sizes up to 2/3’’ 1x c-mount adapter for sensor sizes of 1’’ As the adapter can be adjusted, the camera image can always be exactly matched parfocally to the eyepieces. ACCESSORIES (optional) Dark field condenser (dry or oil) Phase contrast Differential interference contrast (DIC)Fluorescence Polarisation FEATURES Professional, motorised transmitted light microscope Lens type: Planachromatic (60 mm parfocal length) Precise mechanics Outstanding expandability Bright LED illumination WHAT’S INCLUDED Microscope stand with five planachromatic lenses (4x, 10x, 20x, 40x, 100x oil) One pair of 10x eyepieces (field of view: 25 mm, Plug-in diameter: 30 mm), diopter adjustmentDust protection cover Mains cable