BRESSER BH-51MT Ball Head up to 10 kg

Portable power storage (mobile power bank) in maxi format by BRESSER The energy you need in every situation: that's what the mobile Power Station 500 Watt by BRESSER offers you. Whether for tough outdoor use, van life, in the garden or the event of a power failure at home - with the various connection options, you can operate and charge almost all common electronic devices via the powerful and recharcheable 520Wh lithium-ion battery. Perfect for notebooks, musical instrument, etc.: The high-quality 230 volt 500 watt output with a pure sinus wave also supplies sensitive devices with power. In addition, this mobile power station is a silent and environmentally friendly alternative to power generators with combustion engines. In combination with a solar panel (available as an option), the built-in solar charge controller allows you to easily use the sunshine to directly charge your Power Station. The built-in Anderson input for direct charging via solar panel makes this particularly easy. Connection options Charge up to 4 x USB mobile devices such as smartphones, MP-3 players, mobile game paddles, cameras, drones, etc. at the same time. The device offers 1 x USB-A and 1 x USB-C fast charging output with Qualcomm Quick Charge 3.0 support. You can also power up to 5 x 12 volt devices with a total of 10 amps of current draw. Use 1 direct car cigarette lighter connector socket and 4 x DC 2.1/5.5mm connector sockets. With the 2 included adapters from 5.5/2.1mm hollow plug to cigarette lighter socket, you can connect car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. directly and in parallel. In addition, 2 sockets with 230 volts and a total of 500 watts continuous power are available on the unit. Ideal for connecting chargers for notebooks/tablets/smartphones, mobile coolers and refrigerators, musical instruments, etc. or other electrical devices in this power class. The heart of the Power Station: the built-in battery The powerful 520Wh 43Ah/12Volt (140400mA/3.7V) lithium-ion battery reliably stores your energy reserve. It is charged within 8 hours with the included 230V charger or 12V car battery charging cable. Thanks to the built-in solar charge controller, you can also charge the Power Station directly using a solar panel (available as an option). A clear display shows you all relevant information such as the battery charge status, battery charging process, USB output ON/OFF and AC/DC output ON/OFF. Possible operating time with typical applicationsHow long does the Power Station charge or operate your devices? You can easily calculate the approximate operating time yourself: runtime (approx.) = Power Station 520 watt-hour battery x 0.85 / devices input power in watts.For example a notebook with 45 Watt input power: 520 Wh x 0.85 / 45 Watt = runtime in hours; 520 x 0.85 / 45 = 10 hours runtime.LED lamp with 5 Watt: approx. 88 hoursLED lamp with 10 Watt: approx. 44 hoursCamping cooler with 30 Watt: approx. 14 hoursNotebook with 45 Watt: approx. 10 hoursTV with 60 Watt: approx. 7 hoursSmartphone: 50 x chargingTablet computer: 30 x chargingDigital camera: 50 x chargingNotebook: 5 x charging Extensive electronic protection of all current inputs and outputs: The Power Station is protected against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required. FEATURESPortable energy storage (Power Bank / Power Station)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesOperate or charge up to 11 devices at the same timePure sinus wave for both 230 volt outputsAlso suitable for sensitive devices such as notebooks or musical instrumentsMany connection options and adapters includedEnvironmentally friendly and silent alternative to power generatorsIntegrated solar charge controller for direct charging via solar panelComfortable carrying handle with non-slip rubber coatingPowerful 520Wh 43Ah/12 Volt (140400mA/3.7V) lithium ion battery3 x USB A with each 5-9 Volt 2.1 Ampere) and 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support1 x USB C with 5-12 volts 3.0 amps (for smartphones and tablets of the latest generation)4 x 12 Volt DC out 5.5/2.1mm hollow plug (max. total load 10 Amps, short time 12 A)2 x 230 Volt AC out (500 Watt continuous power, short time 1000 Watt)Indication of battery charge status and USB/DC/AC output on/off staus on displayInput charging socket: 13-22 Volt / 6 Ampere (via power supply or solar panel)Built-in Anderson input for direct charging via solar panelCharging time 0-100% approx. 8 hoursTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 Volt 6 amps230 Volt power cord for Europe (1 pc.)230 Volt power cord for UK (1 pc.)Car charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V output (2 pcs.)Instruction manual

This BRESSER RA-Motor for a more comfortable tracking of your telescope. Including controller. Suitable for BRESSER Pluto, Galaxia, Quasar and Skylux telescopes, and all BRESSER carbon look telescopes with EQ-Sky and EQ3 mount.Important note: Not suitable for BRESSER Space Explorer and Firstlight telescopes. FEATURES motor for the BRESSER telescopes: Pluto, Galaxia, Quasar, Skylux, and all BRESSER carbon look telescopes with EQ-Sky and EQ3 mountthanks to the automatic tracking the observed object always remains in the eyepieceSCOPE OF DELIVERYmotorhandheld controllerbattery compartment bag with lanyardmanual

For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual

With this adapter, you can operate your Bresser MCX 102/127 Goto telescope, BRESSER 80/400 Goto or National Geographic 70mm/90mm Goto telescope using a 230V~ wall connector.

Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete  motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX  Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual

Additional counterweight to balance heavy accessories etc.

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER photo mount is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain punctiform even with long exposures. Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER photo mount is designed for a camera with lens of max. 2.5 kg total weight to carry and track. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the optical pole finder, this is done quickly.  After setting up the light and compact photo mount, simply set the approximate latitude (pole height) to the scale and aim Polaris through the illuminated pole finder scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ...  The tracking is carried out by a precise stepper motor, which can also be moved via the hand box with 2- or 32-fold speed in forward and reverse. Thus, the sky section can be adjusted even more precisely. Low power consumption allows up to 50 hours of operation with just one battery charge.  The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount and the tripod with polar wedge are also available separately - Product No.: 4964111 and 4964112   FEATURESEquatorial Photo-MountAdjustable stainless steel field tripod with polar wedge and bubble levelAutomatic siderial tracking against the Earth rotation Handbox to control the tracking motors (2x/32x)Suitable for northern and southern henisphereOptical pole finder scope with illumination unit includedBallhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 3/8" threaded bolt for ballhead mountingPhoto-Mount with 1/4" und 3/8" inner threads for tripod mountingHigh precision stepper motor with helical gear for accurate tracking Large screws and handles for easy usage at night  Battery operation or stabilized power adapter (optional acc.) Battery life: up to 50 hoursPower connector at handbox: 6 volts DC jack 5.5/2.5mm (positive pole at center pin)Weight Photo-Mont with ballhead: 1.4 kg Weight tripod with polar wedge: 3.5 kgLoad capacity of Photo-Mount: up to 2.5 kg Height of camera sattle plate max. 140 cmSCOPE OF DELIVERYFoto-Mount headTracking motor with HandboxUltra-stable stainless steel field tripod with bubble levelBallhead with quick release saddle plate Pole finder scope with illumination unitBattery compartment 6 volts with case (no D-batteries included)Manual   

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. It is also suitable for charging large power stations such as the BRESSER Power Station 100 Watt (art. no.3810000) and the BRESSER Power Station 500 Watt (art. no. 3810020) as well as power stations from other manufacturers with suitable connection values.Universal charger with flexible connection optionsThere is one USB-C connection socket and another orange USB-A connection socket with QC3.0 standard for powering your devices and also for fast charging of newer generations of devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 3 plug adapters (3.5/1.35 mm, 5.5/2.5 mm, 8.0/5.5/0.8 mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example 1: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3400mA (3.4 amps). So 3000 : 3400 x 75 = 66 minutes. Dividing the result by 60 gives the charging time in hours: 1.1 hours.This means that an average smartphone can be fully charged in just about 1.1 hours with a 120-watt solar panel.   Example 2: A large power station battery with a capacity of 13000mAh (13.0 Ah) and a charging current via 18 volts DC plug connection of 6600mA (6.6 amps). So 13000 : 6600 x 75 = 148 minutes. Dividing the result by 60 gives the charging time in hours: 2.5 hours.This means that an average smartphone can be fully charged in just about 2.5 hours with a 120-watt solar panel.   Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points.Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 120 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets, power banks and larger power stations etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection of USB devices via 1 x USB-C and an orange USB-A socket with QC3.0, also for fast charging. Connection of power stations via hollow DC plug, incl. various adapters. AdapterMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONS Output power of the solar panel: 120 wattsOutput voltage at the DC connection cable: 18 voltsOutput current at the DC connection cable: max. 6.6 ampsUSB-C connection socket: 1 x USB-C (for fast charging).Output voltage and current at the USB-C socket: 5V3.0A/9V2.0A/12V1.5AUSB-A socket: 1 x USB orange QC3.0 (for fast charging)Output voltage and current at the orange USB-A QC3 socket: 5V3.4A/9V2.5A/12V2.0ADC connection cable length: 2.5 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 520 x 370 x 50 mmDimensions when unfolded: 1660 x 520 x 35 mmWeight: 4.6 kgSCOPE OF DELIVERYSolar panel 120 Watt (1 piece)Carabiner hook (4 pieces)Integrated DC connection cable (1 piece)Plug adapter (3 pieces)User manual

Versatile wall adapter for all telescopes with 12V. Suitable for BRESSER MCX 102/127 Goto Telescope, BRESSER EXOS II Goto Mount, BRESSER Automatik 80/400 Telescope, National Geographic 70mm/90mm Goto Telescope etc. FEATURESInput: 100-240 V ~ 60/50HzOutput: 12 V DC 3000 mAjack plug 2.5/5.5mm SCOPE OF DELIVERYBRESSER Universal Power Supply

With the BRESSER portable power supply, you won't need to worry about running out of power when you're out and about. Ideal for smartphones, tablets and laptops, the high-performance 88.8 Wh lithium-ion rechargeable battery will get your devices up and running again in no time. The portable power supply also comes with all standard connections, including five USB outputs, a DC output and an AC output. Weighing just 1.04 kg, the power supply has an ultra-lightweight design - perfect for excursions and on-the-go use. Eco-friendly power solution With the BRESSER power supply, you won't need to worry about finding a socket when you're out camping, relaxing by the lake or on a hike. What's more, the built-in battery takes just 5 hours to fully charge. Thanks to its silent design, it offers an eco-friendly alternative to power generators fuelled by combustion engines. You can also harness energy from the sun: instead of using the supplied adapter, you can connect an optional solar charger (not included) to charge the built-in battery. Another practical feature is the ultra-bright built-in LED, which can be used as a torch when you're out and about or during a power cut at home. In addition to 3 brightness levels, the light also features an SOS mode. Discover the BRESSER portable power supply - your compact and lightweight companion for powering your everyday needs! FEATURES Power: 88.8 Wh, 6 Ah / 14.8 V Small and compact design: 165 x 80 x 117 mm Lightweight design: approx. 1.04 kg High-performance lithium-ion battery Charging time (for full charge): Approx. 5 hours Recharges via adapter or optional solar module (not included) USB outputs: 2 x USB 5 V / 2.4 A, total: 4.8 A max. 2 x USB 5-12 V / 2 A QC 3.0 (18 W max., total: 5 V / 3.4 A max.) 1 x USB-C 5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A (PD 2.0 18 W max.) DC output: 12-16.8 V / 10 A, total 13 A max. AC output: Modified sine wave output; AC voltage: 100/110/120/220/230/240 V/AC ± 10 %, output frequency: 50/60 Hz ± 10 % Large LED light with SOS function Protected against short circuits, overcurrent, overvoltage undervoltage, overload and overheating PACKAGE CONTENTS Portable power supply Power adapter Micro USB cable Instruction manual