BRESSER Amici Prism 90° 31.7mm/1.25"

This Barlow lens doubles the focal length of your telescope. It allows you to make astronomical observations with a higher magnification than a conventional eyepiece. Thanks to the Barlow lens between the eyepiece, you can obtain a greater magnification whilst maintaining a comfortable interpupillary distance.This Vixen 2x Barlow lens is ideal for observing and photographing lunar landscapes and details on the brighter planets. The Barlow lens also features a T2 connection for photography with DSLR cameras. With T2 extension tubes, it can also be used as a camera projection adapter.With a deflecting prism, the Barlow lens enables you to obtain a magnification factor of 3.3x.FEATURES2x Barlow lenses with T2 thread2-lens optical systemDoubles the magnification factorAlso suitable as a camera adapter31.7 mm sleeveWeight: 80 gDELIVERY CONTENT 2x Barlow lenses Dust caps

BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

If a observing session is a relaxing and joyful experience is heavily dependend on the choice of eyepieces. People wearing glasses very often have the problem to see the entire field of view when they are using eyepieces with large apparent fields. This problem is now history. The new 62°- LER eyepieces by Explore Scientific do not only offer excellent image sharpness and high resolution and contrast over the full field of view - you can see that full field without problems even with glasses on. Fatigue due to tense head positioning and strained viewing simply does not happen because of the excellent viewing comfort these eyepieces provide even to observers wearing glasses. Enjoy the unique combination of excellent image sharpness out to the edge of the field even for fast optics, superior contrast and unmatched viewing comfort. Eyepieces with perfect combinations of various modern glass substrates and highest standards in manufacturing, quality control and service are a tradition at Explore Scientific - the outstanding resolution and sharpness to the very edge.These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The rubber inlet and the foldable eyecups make handling and using in the field easy. The patentet EMD"-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.Eye relief: 13mm

Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

This Vixen 90° mirrored Star Diagonal, with 1.25” / 31.7 mm nosepiece connection, makes observing objects higher up in the sky much more pleasant and also allows the user to revolve an eyepiece to a more comfortable observing position. This star diagonal is a good quality option and compatible with a large array of refractors and Cassegrain design instruments. It will accept 1.25” / 31.7mm eyepieces and accessories and also has a threaded nosepiece, into which can be fitted 1.25” filters, or Barlow elements, saving you the bother of having to keep swapping these when using different eyepieces. The inside of the diagonal is blackened to minimise internal reflections and light scatter and the body has a pleasingly well-engineered feel to it, without being too weighty. Eyepieces and other accessories are held in place by a simple-to-operate knurled set screw. As this is a mirrored diagonal, it also corrects the up/down orientation of image in astronomical refractors and Cassegrain telescopes, but please note that left and right will still be inverted within the field of view. Not suitable for use with Newtonian telescopes. FEATURES Nosepiece diameter: 1.25” / 31.7 mm Weight: 124g Accessories: Protective dust capsWHAT'S INCLUDED1.25"/31.7mm Star Diagonal Protective dust caps

With the usage of barlow lenses, you can extend the equivalent focal length of telescopes and hence increase the magnification of your observed targets. Subsequently, you can use lower power eyepieces in Barlows to act as much more powerful eyepieces, but retain the larger ocular size and more comfortable viewing that comes with lower power eyepiece designs.Due to their two lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.  The black coloured Barlow element cell in this BRESSER Barlow Lens 2x 31.8mm/1.25," can be unscrewed and has the same thread as 1.25" filters, allowing it to be mounted in 1.25" eyepieces, t-adapters and other accessories, giving you flexibility of use and the ability to vary magnification in different accessories.  For instance, the black Barlow cell screwed into the average length nosepiece of a standard push fit t-adapter will give around 1.6x magnification on an attached DSLR.  This can be very useful when trying to get to photographic focus with some Newtonians and Solar Telescopes, which lack the necessary amount of in focus travel to get a camera to a prime focus position.FEATURESsuitable for observations and photographydoubling of the focal lengthtwo lens designfully multi-coatedWHAT'S INCLUDEDBarlow lens (1pc)

BRESSER Star Diagonal 90 Degrees 1.25”Category: Spare Part for Carbon Look Telescope SeriesDescription: The BRESSER Star Diagonal with a 90-degree angle and a barrel diameter of 1.25 inches (31.7mm) provides comfortable and upright observations, especially at the zenith. Suitable ONLY for refractors (lens telescopes) and ideal as a spare part for the BRESSER Carbon Look Telescope series.Note: NOT suitable for reflectors (Newtonian telescopes, reflecting telescopes)!

Explore the beauties of the night sky with this complete telescope set. Everything is included so that you can get started immediately with the fascinating hobby of astronomy: the astronomical reflector telescope with 150 mm aperture and 1,400 mm focal length, the equatorial mount, the tripod and extensive accessories for exciting observations. Especially important for beginners: the system is very easy to use. Particularly the Moon, the planets and the Sun appear impressive through the Pollux-II. Powerful performance for your first celestial observations – the telescope Take your first steps in astronomy with this classic reflector telescope of the "Newton" type. Because it is equipped with an additional lens inside the focuser, it belongs to the group of the so-called "catadioptric" optics. One advantage of this combination of lens and mirror: despite the large focal length, the telescope tube is relatively short and therefore easily transportable. In addition, you can look forward to a comfortable observation position at all times. This is because with telescopes of this design you do not look in at the back of the telescope, but at the front and laterally. So you don't have to bend down, even if the reflector telescope is pointed vertically upwards at the sky. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 1,400 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 9.3 (F/9.3). This allows you to enjoy viewing your favourite objects at high magnifications with good contrast. Admire especially the planets or details on the Moon through the entry-level telescope. But also some deep sky objects are very nice to observe: open star clusters, globular clusters and bright planetary nebulae such as the Ring Nebula M57 in the constellation Lyra can be seen beautifully through this astronomical telescope. But how close can you get to the celestial eye-catchers? The 150 mm aperture achieves a resolving power that allows magnifications of up to 300x with sharp images. The technical possibilities go far beyond this – theoretically up to 1,050x using the included accessories. However, as the magnification increases, the sharpness of the image can slowly decrease. In addition, high magnification also requires the right environmental conditions. For no matter through which telescope you look, the air turbulence in the atmosphere (seeing conditions) always influences your observation and magnification possibilities. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Solid base for gazing skywards – mount and tripod Have you found the perfect location for your journey of discovery into the night sky? Then simply mount your astronomical telescope with the equatorial mount on the height-adjustable aluminium tripod. The special feature of this type of mount: after the so-called "alignment", the positioning of an axis parallel to the Earth's axis, the movement of the celestial bodies only has to be compensated for on this one axis. To do this, you simply point the axis approximately at Polaris. This is a huge advantage over the azimuthal mount, where both axes are moved simultaneously. In addition, the two flexible shafts with fine adjustment make adjusting and tracking the telescope very precise and comfortable. And to ensure that accessories are always at hand, they can be stored on the handy shelf between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything you need, night and day – the accessories The astronomical telescope comes with a wide range of equipment so that you can start admiring the Moon, planets or the Sun straight away. At night, the LED viewfinder helps you keep an overview of the sky. Once installed parallel on the tube and correctly aligned, the small red dot shows you where the telescope is pointing when you look through it. This way, you can align the optics precisely and find celestial bodies more quickly before you then take a closer look with the high magnification. Varying views of the universe: the two eyepieces allow you to marvel at your observation objects in different magnifications. They are simply inserted into the telescope's focuser using their sockets with a standardised 1.25 inch (31.7 mm) diameter. You want to see even more details? Then go for the 3x barlow lens, which triples the magnification of the eyepieces. If you would like to make astronomical discoveries even during the day, use the solar filter to observe the star of our own solar system. It allows you to easily and safely observe sunspots and granulation on the sun. CAUTION: Never point the telescope at the sun without the solar filter! Capture special highlights easily – with the smartphone adapter, you use your smartphone as a camera for your telescope. This way you can quickly take your first photos of the Moon or the Sun, for example, and get started in astrophotography. FEATURES Reflector telescope with 150 mm aperture and 1,400 mm focal length Reflector type catadioptric Well suited for observing the Sun, Moon and planets Height-adjustable tripod with equatorial EQ3 mount Precise adjustment through flexible shafts and fine adjustment in both axes Easy to use, very suitable for beginners Focal ratio F/9.3, therefore good for observing the planets and details on the moon 1.25 inch (31.7 mm) eyepiece focuser Two eyepieces and one barlow lens with 1.25 inch (31.7 mm) extension tubes for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual

Do you already own a BRESSER Photo Mount (Product No. 4964111) and you are searching for an extremly stable field tripod ?The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. The photo mount's head can be installed directly on the top of the polar wedge using two 1/4 photo thread screws. The distance between the two holes is 35mm, the hole diameter 6.3mm and is suitable for 1/4" photo thread screws.  FEATURESTripod for BRESSER äquatorial Photo-Mount (Product No. 4964111)Adjustable stainless steel field tripod with polar wedge and bubble levelLarge screws and handles for easy usage at nightTripod height max. 125cm  Weight tripod with polar wedge: 3.5 kgCarry capacity is up to 5,0 kgSCOPE OF DELIVERYUltra-stable stainless steel field tripod with bubble levelPolar wedge with adjusters for pole height and azimutInstallation tools    

BRESSER Eyepiece K 4mm 1.25”Category: Spare Part for Carbon Look Telescope Series Description: The BRESSER Eyepiece K 4mm 1.25 is a quality eyepiece with a focal length of 4mm, perfect for highly magnified observations of celestial objects like planets. The barrel diameter is 1.25 inches (31.7mm). Suitable as a spare part for the BRESSER Carbon Look Telescope series. The reversible rubber eyecup provides additional comfort."

The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The lenses are fully multi-coated for high light transmission. FEATURES Push-fit Size: 31.7 mm Apparent field of view: 50° Eye relief: 4.5 mm Weight: 79 g WHAT'S INCLUDED 1x Eyepiece 8 mm (1.25'')