Skip to main content Skip to search Skip to main navigation

BRESSER Advance ICD 10x-160x Zoom Stereo Microscope

Product information "BRESSER Advance ICD 10x-160x Zoom Stereo Microscope"

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.

The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.

The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.
The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.

Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.

Magnifications in basic setting (no optional accessories):
10x eyepieces: 10x – 40x
10x eyepieces plus 2x auxiliary lens: 20x – 80x
20x eyepieces: 20x – 80x
20x eyepieces plus 2x auxiliary lens: 80x – 160x

(other magnifications are possible when using other auxiliary lenses and/or eyepieces)

The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.


APPLICATION RANGE

  • Quality control in industry
  • Materials science
  • Laboratory
  • Botany, gardening, farming
  • Hydrology, aquaculture, fishkeeping
  • Insects, Entomology, pest control
  • Plant physiology, raw food materials, medicinal herbs
  • Schools, teaching

FEATURES

  • Trinocular head with 2 eyepieces and camera port with switch
  • Compatible with BRESSER MikroCam cameras and others
  • 1x-4x stereo-zoom head
  • 2x auxiliary lens
  • Diopter adjustment on both eyepiece holders
  • Adjustable interpupillary distance (52 – 72 mm)
  • Bright LED light (reflected / transmitted)
  • 2 different object plates for best contrast
  • View samples of up to 22 cm height
  • AC adapter Euro/UK (5V / 1000 mA) with USB
  • Heavy build with metal stand
  • Includes 2 pairs of widefield eyepieces

SCOPE OF DELIVERY

  • Microscope
  • 2 pairs of eyepieces (WF 10x / WF 20x)
  • 2x auxiliar lens (1 pcs)
  • 1 pair of rubber eyecups
  • Object plate 94 mm (black / white)
  • Glass object plate 94 mm (matte)
  • AC adapter Euro/UK (5V / 1000 mA)
  • Dust cover
  • Printed manual
1) Footnote: Note the safety warnings in the manual.
5) Footnote: Possibilities to keep a watch according to the light.
Batteries included: false
Batteries required: false
Body material: Metal, Plastic
Colour: white
Continuous magnification: Yes
Dimmer: Dimmable lighting
Diopter setting: true
Electronic eyepiece: optional, available as accessory
Extended warranty (years): 10
Eyecups: Rubber eyecups, fixed
Eyepiece Barrel Diameter (mm): 30.5
Field of application [Microscopes]: Biology, Botany, Coins, Education, Entomology, Gemology, Laboratory, Mineralogy, Nondestructive testing, Research
Focusing system: Coarse and fine focuser
Interpupilar distance max. (mm): 72
Interpupilar distance min. (mm): 52
Laser class/type: Class 1 (harmless to the eyes)
Lighting 5): Incident and transmitted light
Magnification from: 10
Magnification up to: 160
Material: Metal
Mechanical stage: Optional
Net Weight total (incl. accessories) (g): 4700
Object height max. (mm): 220
Object stage features: 2 Object plates, exchangeable
Optical design: Stereo
Power supply 1): 5V/1A power adapter
Power supply unit included: true
Product Family [Microscopes]: Incident and transmitted light microscope
Product series: Advance
Target Group [Microscopes]: Advanced Amateurs, Beginners, Experts
Total height (mm): 380
Total length (mm): 225
Total width (mm): 148
Transportability: limited
Type of illumination: Dimmable, LED
View: Trinocular
Working distance (approx., mm): 28-80
Skip product gallery

Accessories

BRESSER MikroCam SP 5.0 Microscope Camera
The BRESSER MikroCam SP microscope cameras help to make photos and videos with a microscope very easy.The modern CMOS sensors  give brilliant colors with very low noise and is the perfect choice for any application where true natural colors are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23,2mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications the camera can also be mounted using the 1/4” camera tripod thread. FEATURES2592 x 1944 Pixel Sensor 5,70 mm x 4,28 mm (1/2,5'')High quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time lapse functionGood compatibility with different microscopes SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYCamera headUSB 2.0 cable (approx. 1.8 m)Adapters for 23.2 mm, 30 mm and 30.5 mm eyepiece holdersCapture and image processing software

€319.90*
BRESSER MikroCamII Microscope Camera 12MP
The BRESSER MikroCamII microscope cameras help to make photos and videos with a microscope very easy. The modern Sony® CMOS sensors give brilliant colours with very low noise and is the perfect choice for any application where true natural colours are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23.2 mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications, the camera can also be mounted using the 1/4'' camera tripod thread. The BRESSER MikroCamII are equipped with a USB 3.0 port, compared to the MikroCam SP. This enables up to 8 times faster data transfers to the PC compared with the USB 2.0 standard. The camera is able to deliver more than 25 frames per second (depending on resolution, exposure time and PC performance). This is especially important when observing live microorganisms. In addition to this, the camera is exceptionally sensitive. Even in low light conditions (high magnifications, contrast methods) the camera can be operated with short exposure times. FEATURESHigh quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time-lapse functionGood compatibility with different microscopesHighspeed USB 3.0 connectionModern Sony® IMX226 sensor 7.53 mm x 5.64 mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6th generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1 SCOPE OF DELIVERYCamera head, USB 3.0 cable 23.2 mm adapter, 30 mm and 30.5 mm adapters capture and image processing software

€819.90*
MikroCam PRO HDMI camera 5MP
The BRESSER MikroCam Pro HDMI delivers excellent image quality with ease of use. The microscopic image is transferred in Full HD resolution and without delay to a HDMI monitor or TV screen. An optional 11'' HDMI screen is available under item code 5914110 and can be mounted on the camera directly. It gives brilliant images with high contrast. Microscope images and video can now be stored on a SD card with high resolution (up to 5 MP). The Sony Sensor gives excellent image quality. The camera can be controlled with the included USB mouse directly through the on screen display. The on screen functionality now includes a measuring function as well, so the MikroCam Pro HDMI 5MP upgrades your existing trinokular microscope to a fully equipped digital measuring microscope. With the WiFi module, the camera can also supply the images in a wireless network. Due to this, a permanent connection to a PC via USB is not provided. But the professional software MikroCamLabII is still included with the camera for further image analysis after transferring the stored on SD card. Software included in the following languages (for further image analysis - no direct PC connection via USB provided)EnglishGermanFrenchPolishRussianTurkishIndonesianJapaneseChinese (simplified)Chinesisch (traditional) The software includes numerous functions for image processingmeasurement function* (with live image): distance, angle, surface area (polygon, circle, ellipsoid)Image Stacking from video filesHDR (high dynamic range)fluorescence microscopy: fluorophore data for common dyes can be found in the softwareBatch save *for the use of the included measurement functionality a object micrometer slide is necessary, e.g. BRESSER item no. 5916720 (1/10mm and 1/100mm) or 5916710 (1/100mm). FEATURESHDMI-connection on a monitor or TVbrilliant full HD images via HDMI (60 frames / sec) or WiFi (up to 25 frames / sec)measure specimens via on screen display - no PC necessaryWDR (wide dynamic range) function included SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYMikroCam Pro HDMI with C-MountAC adapterMouseHDMI cableWiFi dongleSoftware (CD-ROM)

€1,059.90*
BRESSER MikroCam PRO HDMI Autofocus
The BRESSER MikroCam Pro HDMI Autofocus delivers excellent image quality with ease of use. The microscopic image is transferred in Full HD resolution and without delay to a HDMI monitor or TV screen. An optional 11" HDMI screen is available under item code 5914110 and can be mounted on the camera directly. It gives brilliant images with high contrast. Microscope images and video can now be stored on a SD card. The Sony Sensor gives excellent image quality and is very light sensitive. So this camera is recommended for low light contrast methods like darkfield or phase contrast. The autofocus enables the user to focus without using the mechanical focus wheel. When changing the objective, the focus will automatically be adjusted from the camera. The focus range from the "zero" position (which is the standard backfocus for C-Mount) up to 5,4 mm intrafocal to reach CS-Mount distance, and 10,6 mm extrafocal, to cover a wide range. In addition to the autofocus functionality, you can set the focus with the mouse or set a user defined focus range. The camera can be controlled with the included USB mouse directly through the on screen display. The on screen functionality now includes a measuring function as well, so the MikroCam Pro HDMI Autofocus upgrades your existing trinokular microscope to a fully equipped digital autofocus microscope. With the WiFi module, the camera can also supply the images in a wireless network. Due to this, a permanent connection to a PC via USB is not provided. But the professional software MikroCamLabII is still included with the camera for further image analysis after transferring the data stored on the SD card. The MikroCam Pro HDMI Autofocus has a wide range of applications:DocumentationAnalysisPresentationQuality ControlAutomationMachine Vision FEATURESHDMI-connection for a monitor or compatible TVBrilliant images in Full HD using HDMI (60 images / sec) or WiFi (up to 25 images / sec)Direct measuring function using the on screen display (*item no. 5916720 necessary for calibration)Wide dynamic range (WDR)Save images and video on SD card (max. 32 GB, not included)focus range: -5,4 mm bis 0 (C-Mount Abstand) bis 10,6 mm1/4" tripod connectionC-Mount for excellent adaptability, also suitable for C-Mount lenses SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYMikroCam Pro HDMI Autofocus with C-MountAC adapterMouseHDMI cableWiFi dongleSoftware (CD-ROM)

€999.90*
BRESSER Blank Slide with 0.1 & 0.01mm micrometer
Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

€62.90*
BRESSER ICD 30.5mm Widefield Eyepiece 15x
The 10x eyepiece is suitable for all microscopes with 23.2mm eyepiece tube diameter. This diameter is widely used in stereo microscopes, also from other brands or manufacturers. Please select the eyepiece magnification in correspondence to the objective you are using. A low objective magnification allows for a higher magnification of the eyepiece. For example, combined with 4x or 10x objectives, eyepieces with 20x or 25x magnification can be used without loss of image quality. With a 100x objective, a 10x or 12.5x eyepiece is usually the highest recommended eyepiece magnification. To calculate the maximum useful magnification, consider the numerical aperture (N. A.) of the objective lens: numerical aperture of the objective lens x 1000 = max. useful magnification Here is a typical example: for a 10x objective with numerical aperture NA 0.25, a maximum of 250x magnification can be realized. This is realized with a 25x eyepiece. The numerical aperture is usually printed besides the magnification factor on many objectives. Magnifications beyond the max. useful magnification do not show any further details (so-called “empty magnification”) and are therefore not recommended. FEATURES Wide field eyepiece 15x for stereo microscopes Eyepiece with wide field of view Compatible with most stereo microscopes Microscope should have diopter adjustment built in Easy to change SCOPE OF DELIVERY ICD 30.5mm Widefield Eyepiece 15x

€49.90*
BRESSER ICD 30.5 mm Widefield Eyepiece 20x
This Widefield Eyepiece 20x is compatible to the following BRESSER microscopes:Biorit ICD (5802500)Researcher ICD Halogen (5803000)Researcher ICD LED/Akku (5803100)Advance ICD (5804000)BRESSER does not only offer many different microscopes but also much accessories. The eyepieces provide, along with the objectives, the magnification of the image. If you use strong magnifying eyepieces, a bright illumination is necessary.FEATURES 30.5 mm 20x wide field eyepiece for Bresser microscopes Suitable for: Biorit ICD, Researcher ICD and LED Suitable for: Advance ICD For articles with article number: 5802500, 5803000, 5803100, 5804000 SCOPE OF DELIVERY1x Widefield Eyepiece 20x

€49.90*
%
BRESSER ICD WF 25x/30,5 mm Eyepiece
This wide-field eyepiece 25x for BRESSER Researcher ICD Microscopes is compatible with the following BRESSER microscopes:Biorit ICD (5802500)Researcher ICD Halogen (5803000)Researcher ICD LED / Battery (5803100)Analyth ICD (5803500)Advance ICD (5804000)In addition to a diverse selection of microscopes BRESSER also offers a wide range of accessories. Eyepieces provide together with the objective lenses the magnification of the image. When using high-magnification eyepieces, it is also necessary to provide an adequate illumination. FEATURES Wide-field eyepiece 25-fold magnification Suitable for many BRESSER Microscopes SCOPE OF DELIVERY ICD WF 25x/30,5 mm Eyepiece

€39.00* €49.90* (21.84% saved)
BRESSER additional objective 0.5x
Additional objective for BRESSER Stereo Microscopes Advance ICD 5804000 and Science ETD-101 5806100With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification

€109.90*
BRESSER additional objective 0.75x
Additional objective for Bresser Stereo Microscopes Advance ICD 5804000 and Science ETD-101 5806100With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification

€94.90*
BRESSER additional objective 1.5x
Additional objective for Bresser Stereo Microscopes Advance ICD 5804000 and Science ETD-101 5806100With this objectives it is possible to extend the magnification range of the microscope. They are attached in front of the pair of objectives via the M48 thread. Please note that the additional objective will alter the working distance, i.e. the distance between the microscope head and the object that is in focus.Additional objectives with magnifications < 1.0 will raise the working distance. This might be especially helpful when manipulating samples by hand or use of tools is necessary (soldering, engraving etc.). Objectives with magnifications > 1.0 will lower the working distance.Art.Nr. 5941480 0.5 x Magnification Art.Nr. 5941481 0.75 x Magnification Art.Nr. 5941482 1.5 x Magnification Art.Nr. 5941483 2.0 x Magnification

€104.90*
BRESSER reduction lens 0.5x fix
The BRESSER 0.5x reducing lens is designed to enlarge the image from a microscope camera. It increases the light intensity and therefore reduces the exposure time. In the case of trinocular microscopes, the adapter usually enables the focus to be matched to the focus of the eyepiece.It is compatible with focusers with a 23.2 mm receptacle. This adapter is specially designed for cameras with sensor sizes of 1/2'' or 1/3''. The connection is made via a 1'' C-mount thread. FEATURES:C-mount threadMicroscope connector: 23.2 mmMagnification factor: 0.5x DELIVERY CONTENT:0.5x reduction lens (fixed)

€64.90*
BRESSER Reduction lens 0.5x variable
The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

€119.90*
BRESSER Reduction lens 0.75x variable
The BRESSER 0.75x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 2/3". The connection is made via 1 " C-mount thread.

€119.90*
BRESSER Reduction lens 1x variable
The BRESSER reduction lens 1x variable is used to shift the focal point of the camera. The image section of the camera can also be varied slightly. Especially for trinocular microscopes, the adapter enables the camera focus to be adapted to the eyepiece focus. It is compatible with eyepiece pull-outs with 23.2 mm plug-in socket. This adapter is specially designed for cameras with sensor sizes of 1''. The connection is made via a 1'' C-Mount thread. This adapter is especially recommended for the MikroCamII 20 MP (Art.-No. 5914200). FEATURES For cameras with 1'' C-mount thread Especially for cameras with 1'' CMOS sensor For adjusting the focus position For 23.2 mm plug-in receptacles SCOPE OF DELIVERY 1x reduction optics

€129.90*
BRESSER SLR-camera-adapter 2x T2 23.2 mm
The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

€209.90*
BRESSER MikroCam mini Full HD HDMI microscope camera
The MikroCam MINI Full HD HDMI is a very compact HDMI camera. No PC or laptop is needed to use it, simply connect to a monitor, TV, beamer or smartboard. This makes the camera especially suited for teaching. As a plus, you can also mount the BRESSER HDMI display (item no. 5914120) directly on the camera. Connection via HDMI is easy and the camera is ready to go instantly. No software installation, PC setup etc. is necessary. The lossless data transfer ensures a good image quality and the image is lag free and with a constant high framerate of 60fps. This is especially helpful when digitizing a microscope workplace in QC or production With the included mouse, you can control the camera via 3 distinctive on screen menus (camera control, settings, measurements). To calibrate measurements, please add a calibration slide (e.g. item no. 5916720). The camera is well suited for presentations, lectures etc. because upon startup it is working directly in auto mode with no user input. The camera does not have a start button, it is working directly after power up. Menus and mouse icon are not visible if the mouse is not connected. Please note that this camera does not allow direct PC connection via USB. The USB port is for the mouse input only. FEATURES HDMI connection for monitor, beamer or smartboard C-mount adapter thread enables connection to various microscopes (independent of brand / manufacturer) With SD card slot (SD card not included) (Max. 512 GB) No PC or laptop necessary SCOPE OF DELIVERY MikroCam MINI Full HD HDMI with c-mount AC adapter (12 V / 1000 mA), EU USB mouse HDMI cable (length appr. 1.5 m)

€295.90*
BRESSER MikroCam SP 3.1 Microscope Camera
The BRESSER MikroCam SP microscope cameras help to make photos and videos with a microscope very easy.The modern CMOS sensors  give brilliant colors with very low noise and is the perfect choice for any application where true natural colors are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23,2mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications the camera can also be mounted using the 1/4” camera tripod thread. FEATURES2048 x 1536 Pixel Sensor 5,28 mm x 3,84 mm (1/2.8'') Pixel: 2,5 x 2,5 µmHigh quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time lapse functionGood compatibility with different microscopes SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYCamera head USB 2.0 cable (approx. 1.8 m)Adapters for 23.2 mm, 30 mm and 30.5 mm eyepiece holdersCapture and image processing software

€274.90*
BRESSER MikroCam II 20 MP 1'' Microscope Camera
The BRESSER MikroCam II 20 MP 1’’ microscope camera is the professional solution when it comes to microscope imaging. This camera has a big 1’’ sensor (image area 13.06 x 8.8 mm); this is the biggest sensor of the MikroCam camera range. With this camera it is possible to document roughly the same field of view as it can be seen through the eyepiece (e.g. when using a 10x / 22mm). Other models will cover only 50% or less of the eyepiece field of view. The Sony IMX183 CMOS-sensor is very sensitive and has extremely low image noise, which makes this camera especially suitable for contrast methods like dark field or phase contrast. The MikroCam Lab II software comes with a wide range of professional functions, e.g. measurements in live view (calibration slide needed), mosaic, Focus-Stacking (for improved depth of field). All automatic functions (exposure time, gain, white balance etc) can be adjusted manually as well. Due to the big sensor size the camera will not work with all microscope models. It might be possible that the optics will not illuminate the full sensor, so you experience vignetting. Usually this can be resolved by using the optional 1x optical adapter (item no. 5914001). Please note that this camera model is not suitable for the stereo microscope BRESSER Science ETD-201. It will cover only a small field of view. SPECIFICATIONSRobust metal housingProfessional software suite including measurements, dark and bright field calibration, focus stacking, mosaic and moreSave images and video, including time lapsecompatible to most microscopesHigh speed USB 3.0 connection for high frame rateModern Sony® IMX183 Sensor 13,06 x 8,8 mm (1'')1/4’’ connectorC-Mount adapter, compatible with c-mount lenses SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1 SCOPE OF DELIVERYcamera bodyUSB 3.0 cable23.2 mm, 30 mm und 30.5 mm adapterSoftware for imaging and processing (Windows compatible)

€1,059.90*
BRESSER MikroCamII 9MP 4K 1'' Microscope Camera
Capture 4K video with the BRESSER MikroCamII 9MP 4K microscope camera. The video can be up to 30 fps depending on the PC used. The camera uses a global shutter, which captures moving objects without distortion. The big image sensor (14.13 x 7.45mm) captures a big field of view. The high light sensitivity of the Sony® IMX305 CMOS-sensor produces excellent images even when using darkfield or phase contrast.The BRESSER MikroCamLabII software includes a variety of useful functions, e.g. measuring in live mode (optional calibration slide needed), mosaic/stitching, focus stacking (for extended depth of field). All camera parameters (exposure time, gain, white balance) can be set manually.Mosaic and focus stacking can be done in live mode, which gives instant results even for unexperienced users. The method is also much faster than the normal procedure where a set of images is rendered afterwards. To use the mosaic function in live mode, a crosstable / mechanical desk is highly recommended to move the sample.The big camera sensor is not compatible with all microscope models. It might lead  to vignetting (dark edges). To compensate this, a 1.0x optical adapter (item code 5914001) is recommended.This camera will not work with the ETD-201 stereo microscope as the microscope will illuminate only a part of the sensor. For this microscope, we recommend the model MikroCamII 12MP item code 5914912. SPECIFICATIONSmodern Sony® IMX305 sensor 14,13mm x 7,45 mm (1'')8,85 MP resolution (4096x2160 pixels)software included, which contains measuring, focus stacking, mosaic / stitching for results with bigger fields or extended focus depthcapture images and video, incl. slow motion and timelapse4K video with up to 30 fpsbig field of viewPrecisely machined metal housingcompatible with numerous microscope modelswith c-mount connector, which is widely used.Compatible  with c-mount lenses.1/4" connector, for photo tripods, clamps etc.Highspeed USB 3.0 port SYSTEMANFORDERUNGENWindows 10 oder 11Intel i3, i5, i7 oder i9 Prozessor ab 6. Generation bzw.AMD Ryzen ProzessorOptisches Laufwerk oder Internetverbindung für SoftwaredownloadUSB 3.0, 3.1 SCOPE OF DELIVERYcamera bodyUSB 3.0 cable3 adapters: 23.2mm  30.0 mm and 30.5 mmsoftware CD (Windows)

€1,479.90*
BRESSER MikroCamII 5MP HIS Microscope Camera
The BRESSER MikroCamII 5MP HIS with the light sensitive and low-noise Sony® IMX264 sensor is perfectly suited for low light applications. The camera uses a global shutter, which captures moving objects without distortion. With sufficient lighting, the camera is also capable of ultra short exposures as low as 1/50.000 second. In this mode, the camera can virtually freeze fast moving objects. The BRESSER MikroCamLabII software includes a variety of useful functions, e.g. measuring in live mode (optional calibration slide needed), mosaic/stitching, focus stacking (for extended depth of field). All camera parameters (exposure time, gain, white balance) can be set manually. Mosaic and focus stacking can be done in live mode, which gives instant results even for unexperienced users. The method is also much faster than the normal procedure where a set of images is rendered afterwards. To use the mosaic function in live mode, a crosstable / mechanical desk is highly recommended to move the sample. The big camera sensor is not compatible with all microscope models. It might lead to vignetting (dark edges). To compensate this, a 1.0x optical adapter (item code 5914001) is recommended. This camera will not work with the ETD-201 stereo microscope as the microscope will illuminate only a part of the sensor. For this microscope, we recommend the model MikroCamII 12MP item code 5914912. SPECIFICATIONSmodern Sony® IMX264 sensor 8,45mm x 7,07 mm (2/3'')5 MP (2448x2048)software included, which contains measuring, focus stacking, mosaic / stitching for results with bigger fields or extended focus depthcapture images and video, incl. slow motion and timelapse1/4" tripod connectorPrecisely machined metal housingcompatible with numerous microscope modelswith c-mount connector, which is widely used. Compatible  with c-mount lenses.1/4" connector, for photo tripods, clamps etc.Highspeed USB 3.0 port SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1 SCOPE OF DELIVERYcamera bodyUSB 3.0 cable3 adapters: 23.2mm  30.0 mm and 30.5 mmsoftware CD (Windows)

€1,149.90*
BRESSER Microscope Cutlery Solingen Steel
High-quality dissecting tool set for amateur and professional purposes. Made in Germany! No matter if amateur microscoper or professional - working with inferior tools is unsatisfying. For that reason, we offer these dissecting tools to you. They are made from Solingen steel and meet the highest quality demands. Accessories • 1 Spatula • 1 Scalpel • 1 Tweezer • 1 Scissor • 1 Slice catcher • 2 Preparation Needles • Imitation leather case

€67.90*
BRESSER Mechanical Stage for Stereo Microscopes (95 mm)
The BRESSER Mechanical Stage for Stereo Microscopes allows precise object movement in both the X and Y directions, making accurate positioning easy. Each axis features a vernier scale for added precision. Thanks to its adjustable movement, the mechanical stage can also be used to create mosaic images when combined with a BRESSER MikroCam (II, SP, SF). It is designed to replace the standard stage plate on a microscope and is compatible with devices that have a 95 mm stage plate. The maximum movement range is 165 x 65 mm, depending on the microscope’s size. With a height of 26 mm above the microscope stage, the mechanical stage slightly reduces the maximum object height. Compatible with the following devices: BRESSER Erudit ICD (5803600) BRESSER Advance ICD (5804000) BRESSER DST-0745 (5808100) FEATURES Suitable for microscopes with a 95 mm object plate Maximum movement range: 165 x 65 mm (depending on the microscope size) Coaxial adjustment knobs for smooth operation Precision measuring bar with vernier scales on both axes Compatible with both reflected and transmitted light microscopy SCOPE OF DELIVERY Mechanical stage with glass plate and two object clamps

€179.90*
Skip product gallery

Customers also bought

BRESSER MikroCam SP 5.0 Microscope Camera
The BRESSER MikroCam SP microscope cameras help to make photos and videos with a microscope very easy.The modern CMOS sensors  give brilliant colors with very low noise and is the perfect choice for any application where true natural colors are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23,2mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications the camera can also be mounted using the 1/4” camera tripod thread. FEATURES2592 x 1944 Pixel Sensor 5,70 mm x 4,28 mm (1/2,5'')High quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time lapse functionGood compatibility with different microscopes SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYCamera headUSB 2.0 cable (approx. 1.8 m)Adapters for 23.2 mm, 30 mm and 30.5 mm eyepiece holdersCapture and image processing software

€319.90*
BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

€14.90*
BRESSER MikrOkular Full HD eyepiece camera
Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light. FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, tif, pngvideo format mp4 SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0 SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)

€67.90*
BRESSER Microscope Photo Adapter 23mm
Photo adapters are used to mount a camera on a microscope. SLR cameras work without their own objective. The magnification is made only by the microscope objectives. A specific T2-ring is necessary!With the BRESSER photo adapter 23 mm reflex cameras can be connected to microscopes with a eyepiece tube diameter of 23 mm. The camera is connected to the photo adapter via an optionally available T2 ring. The photo adapter is put into the eyepiece tube of the microscope instead of the eyepiece. Depending on type of construction and sensor or film size shadows may occur at the margins of the image.This photo adapter is compatible with the following BRESSER microscopes:Researcher Bino (5722100)Researcher Trinocular (5723100)Analyth Bino (5730000)BioScience Bino (5750500)Biolux ICD (5802000)Advance ICD (5804000)

€27.90*
BRESSER SLR-camera-adapter 2x T2 23.2 mm
The BRESSER SLR camera adapter 2x T2 functions as an adapter between a microscope and a reflex or system camera. A camera-specific T2 ring is required for operation. This adapter is suitable for common microscopes with a 23.2 mm connection. Depending on the setup, you can achieve a parfocal image with a trinocular microscope. As with other adapters, the visible field of view remains smaller than the ocular field of view. FEATURES 23.2 mm plug connection T2 thread Integrated lens with 2x magnification SCOPE OF DELIVERY Camera adapter

€209.90*
BRESSER Blank Slide with 0.1 & 0.01mm micrometer
Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

€62.90*
Skip product gallery

Customers also viewed

BRESSER Science ETD-201 8-50x Trino Zoom Stereo-Microscope
The BRESSER Science ETD-201 is a high-quality stereo reflected-light and transmitted-light microscope. It is perfectly qualified for medical applications, the use in agriculture and forestry, in criminology, in academic and scientific institutes and schools, as well as for the assembly and quality assurance of components in precision mechanics and electronic engineering. The extra wide foot with stage and exceptionally tall height range permit observations of large objects. The integrated reflected- and transmitted-light illumination can be used in combination and is dimmable. The angle of incidence can be user-friendly adjusted and locked in position. A continuous range of magnification from 8x to 50x is possible with the exchangeable wide field eyepieces (WF 10x) and the 6.25-times stereo zoom objective lens (0,8x-5x).The interpupillary distance and dioptre compensation can be adjusted individually. The trinocular microscope head is rotatable (360°) and comes with two 45° inclined eyepiece tubes and a separate camera tube for the attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope zoom headMicroscope stand2x eyepiece (WF 10x)Glass platePlastic plate (black & white)Dust coverManual

€799.90*
%
BRESSER CO² Air Quality Monitor Smile
Endless meetings, urgent work emails, looking after the kids, cleaning the flat… during our hectic lifestyles, it's easy to forget about regular ventilation. Even though we know better: a high CO2 concentration can affect our health and wellbeing. The BRESSER CO2 air quality monitor Smile will show you when it's time to let some fresh air into your home or office. Simply have a quick look at the intuitive LCD display to keep an eye on the CO2 concentration, temperature and humidity. You don't need to worry about remembering what constitutes a critical carbon dioxide level - the intuitive graphical display with a linear scale and smiley face will show you the quality of the air in your surroundings. The measurements are precise, with high resolution and fast. Ventilation alarmThe practical carbon dioxide alarm reminds you when you need to let in some fresh air. If the default setting is different to your ideal indoor climate, you can configure your own limit up to a maximum of 5000 ppm. The alarm function can then be activated with a simple button press. If the preset limit is exceeded, the alarm will sound at a varying intensity depending on the CO2 concentration. The display will also show a flashing arrow symbol to remind you to open the windows. Humidity is also an important factor, as high humidity levels can cause mould to form. You can also set your own visual alarm for this reading so that you will know whether the air in the room is too dry or too moist. If you want to see more than just the current readings, there is also a practical memory function that displays the maximum and minimum values for the last 24 hours as well as the average values from the last 15 minutes and 8 hours for carbon dioxide concentration, temperature and humidity. The device is powered by a power adapter to enable continuous operation. The BRESSER CO2 Air quality monitor Smile - the perfect solution for busy fresh air fans! FEATURESSimultaneous display of CO2 concentration, temperature (°C / °F) and humidity Colour LCD display, clear and intuitive Graphical display of current CO2 concent Carbon dioxide alarm functions: Humidity alarm function Memory function High precision, high resolution, rapid response time Dimensions: 123 x 110 x 32 mm Powered by power adapter, long-term continuous operation possible DELIVERY CONTENTCO2 air quality monitor Power adapter Instruction manual

Variants from €49.00*
€60.00* €99.00* (39.39% saved)
BRESSER Stereo Microscope Advance ICD 10x-160x Zoom with MikroCamII 20 MP 1'' Microscope Camera
Professional complete set for precise analyses and high-resolution image results: This powerful set combines the high-quality Advance ICD stereo microscope with the modern MikroCamII 20MP camera and a 1x reduction lens. It is ideal for fine detail observations and high-resolution images, ensuring reliable documentation of your results.The Microscope in DetailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and lifelike due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focus drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod, allowing observation of very large objects up to approx. 22 cm in height.The bright LED incident illumination is tilt-adjustable. The particularly even and bright LED transmitted illumination provides a homogeneous background for transmitted light specimens. The illumination can be switched separately, so incident and transmitted light can be used separately or together depending on the sample type. Brightness is conveniently controlled with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapters) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to its wide magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements. These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for camera connection. A switch diverts the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected. APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teaching MICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible with e.g. BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast with the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCamII 20 MP 1'' microscope camera is the professional solution for documentation on the microscope and has the largest sensor in the MikroCam range with an edge length of 13.06 x 8.8 mm. This allows large image fields to be captured. Depending on the microscope model, the entire eyepiece field of view can be documented with this camera (for a 10x / 22mm eyepiece). Other cameras often capture less than 50% of the eyepiece image field. The Sony IMX183 CMOS sensor has extremely low noise at high light sensitivity, making this camera also excellent for darkfield or phase contrast imaging. The MikroCam Lab II software offers a variety of functions, such as measurement in live image (calibration slide required), mosaic image creation, focus stacking (for increased depth of field). All automatic functions (exposure time, sensitivity, white balance, etc.) can also be set manually. Due to the large sensor, the camera is not optimal for every microscope. Vignetting may occur in some cases. This shading is usually corrected by a 1x optic (item no. 5914001), which is screwed into the camera. This camera is not designed for the trinocular tube of the ETD-201. Only a small part of the image field can be used with this microscope. MICROSCOPE CAMERA FEATURESHigh-quality metal housingMany software functions, such as measurement, focus stacking (overlaying multiple images for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionGood compatibility with various microscopesHigh-speed USB 3.0 connectionModern Sony IMX183 sensor 13.06 x 8.8 mm (1'')1/4'' tripod thread, e.g. for a photo tripodC-mount thread: for easy adaptability, also suitable for C-mount objectives SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmRecording and image processing software (for Windows)

€1,752.90*
BRESSER Analyth STR 10x - 60x Stereo Reflected and Transmitted Light Microscope
The BRESSER Analyth STR 10x - 60x Stereo Reflected and Transmitted Light Microscope features 3 different objective magnifications (1x, 2x, 3x), which can be easily switched by rotating the objective. This allows for magnifications of 10x, 20x, 30x, 40x and 60x. Two eyepiece pairs with 10x and 20x magnification are included. They are secured with a small screw to prevent them from falling out. The stereo design provides a particularly vivid and three-dimensional view of structured objects. The low initial magnification of 10x is especially suitable for working with children. This allows objects up to 20 mm in size to be viewed in full. The Analyth STR is therefore extremely versatile. It is suitable for insects, plants, minerals and much more, and can be used for hobbies, in schools and in professional settings. Of course, the stereo microscope can also be used for quality control, in horticulture and agriculture, for water analysis and many other applications. Interpupillary distance and dioptre adjustment can be set individually. The eyepieces offer a large field of view and can be fitted with rubber eyecups. The microscope can be powered either via the mains adapter or with 3 AA batteries (not included). Thanks to the practical carrying handle, it can be used on the go – for example, in the garden or during field trips. FEATURES Microscope with 5 magnifications: 10x, 20x, 40x, 60x Wide-field eyepieces with rubber eyecups and 20 mm field of view Bright, energy-efficient LED illumination, adjustable angle Illumination for reflected and transmitted light can be switched separately Dimmer via membrane buttons with status indicator Two stage plates (black/white and frosted glass), stage clips SCOPE OF DELIVERY Microscope with 3 objective pairs: 1x, 2x, 3x Metal stand with LED illumination, power supply and battery compartment 2 eyepiece pairs (10x, 20x) 1 pair of rubber eyecups Glass stage plate Plastic stage plate (black/white) Dust cover Instruction manual

€278.90*
BRESSER Erudit ICD Stereo Microscope (30.5)
The BRESSER Erudit ICD microscope is a stereo dissecting microscope and gives a threedimensional view. This is especially impressive when viewing structured materials.WIth the maximum object height of 53mm you can view also bigger objects. The microscope is perfect for a variety of objects, like plants, insects, geological handpieces, etc. The Erudit ICD is also the perfect choice for children, because there is no need for tedious and difficult sample preparation. Simply place the sample on the object plate and view the finest details! The black/white object plate gives good contrast when viewing with incident light. With battery power the microscope is ready for your next excursion or field work, or use it anywhere around the house. With the sturdy carry case it is easily transported or stowed away.FEATURESType: Stereo microscope / dissecting microscope with incident and transmitted lightApplications: Biology, botany, insectsBlack/White-Object plate for optimized contrastGlass object plate, 94mmRubber eye cups for comfortable viewing, reduces stray lightSmartphone holder for conveniant documentationLong life LED lighting, battery powered. Use anywhere, e.g. for field workAdjustable binocular head, diopter adjustmentSturdy carry caseSPECIFICATIONSMagnification: 20x, 40xStereo-ObjectiveEyepiece barrel diameter: 30,5 mmBattery powered (3x )Type AASCOPE OF DELIVERYStereo dissecting microscope with transmitted and incident light2x wide field 10x eyepiecesStereo objectives, 2x/4xGlass object plate, clear glass Black/white object plateSmartphone holderPlastic carry case

€199.90*