BRESSER 7-in-1 Outdoor Sensor for 7003210/7003220/7003230/7003510 4CAST PRO Weather Station

This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 9080800 FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 9080800 FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. The lightning detector is compatible with the following BRESSER weather stations: 7003210, 7003220, 7003230, 7003240, 7003520 FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. The pool sensor is compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 7002531, 9080800 FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.Suitable for the following BRESSER weather stations: 7902535, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003230, 7003210, 7003200, 7003220, 7003510, WSX5003, 7002531, 7002571, 7003100, 7003900, 9080700 Compatible with the following BRESSER weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 7002580, 7002581 und 7002585/WSX1001 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

With the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, innovation flows through your weather data. This clever device allows you to access readings from your existing BRESSER weather station or various optional sensors (not included), wherever you are. It automatically uploads them to the most popular online platforms via Wi-Fi. With the built-in thermometer, hygrometer, and barometer, you can also monitor air pressure, indoor temperature, and humidity indoors. A great upgrade: add Wi-Fi to your weather station Already own a BRESSER weather station, but missing Wi-Fi to complete your meteorology setup? Check below to see if the Wi-Fi Gateway El Niño is compatible with your model. If it is, you can quickly transform your existing device into a Wi-Fi-enabled weather station. You can also add optional sensors (not included) for online data monitoring to enhance your weather tracking. Always available: your weather data on online platforms Stay up-to-date automatically: Your weather data is uploaded directly to platforms like ProWeatherLive, Weather Underground, and Weathercloud via the Wi-Fi Gateway. This allows you to share your station’s readings with the wider weather community. A handy extra: Three years of membership with ProWeatherLive are included with your purchase. Customise your professional weather station Do you have your own idea of what a weather station should look like? With the Wi-Fi Gateway for up to 20 sensors, you can create your perfect setup. Just consult the list of compatible BRESSER devices, and you’ll soon have your customised weather expert at your fingertips. Whether you're expanding or starting from scratch, with the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, you can either bring your current weather station online or build your very own. FEATURES Compact Wi-Fi Gateway for automatically uploading local weather sensor data to online platforms Receives measurement data from optional weather sensors (not included) Publish data on ProWeatherLive (includes 3 years membership), Weather Underground, Weathercloud, and one additional platform Access your data online anytime, anywhere Measures indoor temperature, humidity, and air pressure Configure Wi-Fi, time, weather platforms, calibration, and firmware updates easily via the WSLink app Compatible with the following BRESSER weather stations:Item No: WSX3001 / 7003600QT5000 / 7003600GYE000 / 7003600CM3000 / 7003100QT5000 / 7003100HZI000 / 7003100GYE000 / 7003100CM3000 / 9080700 / 9080600 / 9080500 / 7003900 / 7003800 / 7003700 / 7003510 / 7003500 / 7003360 / 7003300 / 7003240 / 7003230 / 7003220 / 7003210 / 7003200 / 7002620 / 7002590 / 7002586 / 7002585 / 7002582 / 7002581 / 7002580 / 7002571 / 7002551 / 7002525**Item No.: 7002513 / 7002512 / 7002511 / 7002510 / 9602510 - exclusively LOT No. 1164820 and higher**Item No: 7002550QT5000 / 7002550GYE000 / 7002550CM3000 - exclusively LOT No. 973504 and higher**Compatible with many optional sensors (not included): 1x professional sensor (Item Numbers: 7802580 / 7803300 / 7803200 / 7803510) Up to 7x thermo-hygro sensors (Item Number: 7009971), soil sensors (Item Number: 7009972), or pool sensors (Item Number: 7009973) (not included) Up to 7x water detectors (Item Number: 7009975) (not included) 1x lightning sensor (Item Number: 7009976) (not included) 1x PM2.5/10 sensor (Item Number: 7009970) (not included) 1x CO2 sensor (Item Number: 7009977) (not included) 1x HCHO + VOC sensor (Item Number: 7009978) (not included) Mounting: Stand or wall mount Power supply: USB cable with power adapter SCOPE OF DELIVERY Gateway USB cable USB power adapter User manual ** Item No. and LOT No. are shown on the device and the packaging.

Has your 5-in-1 external sensor for your BRESSER WiFi colour weather centre succumbed to the impact of your child’s football or your last house move? Then it’s time for a replacement. And you don’t need to buy the whole product! This 5-in-1 external sensor is the perfect replacement part for your weather centre. It takes no time to install: Establish the power supply, take the mounting materials from the packaging and fit the wireless sensor at your preferred spot as normal. The existing base station will connect to the replacement external sensor automatically as normal. And if the two devices can’t find one another? You can manually intervene: Simply press the WiFi/SENSOR button on the base station and it will start to search for the new wireless sensor. Once connected, the local measured values for wind speed, wind direction, humidity, temperature and precipitation will be transmitted via 868 MHz to your colour display. Good prospects again: Get the full functionality from your WiFi colour weather sensor again with the 5-in-1 external sensor.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. For all units with a lower LOT number, you need the sensor with item number 7802510. You can check the LOT number on your unit as well as on the packaging. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

Falling under the car when moving, taking a knock from a child's football, simply slipping from your hand during installation - even the most robust 7-in-1 wireless sensor is not immune to everyday misadventure. But, even if your outdoor sensor is permanently damaged beyond repair, there's no need to buy a whole new weather station simply to keep an eye on the weather. Your base station can continue to function perfectly. This sensor is the perfect replacement part for your 4-day 4CAST WiFi weather centre. The device is operated in much the same way as you are used to: Start by inserting the batteries (not included). Then, fit the replacement sensor in your preferred location using the installation material supplied. Once everything has been tightened up, all you need to do is connect to your base station (not included). With a replacement sensor, this is not an automatic process; you will needed to press the WiFi/SENSOR button on the console. The console will then start to search for the signal from the sensor. Connected? Then you're done, and you can start enjoying up-to-date and local weather data from your sensor for outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level and light intensity. Rehabilitate your 4-day 4CAST WiFi weather centre with the replacement sensor. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm DELIVERY CONTENT Wireless sensor with installation material Base station not included! Instruction manual

It's easily done: you've just moved house and want to move your 7-in-1 professional sensor for your BRESSER Wi-Fi Comfort weather centre to a new location. While attempting to move the sensor, you accidentally drop it and the sensor stops working. If this sounds like you, this 7-in-1 wireless sensor is just what you need for your weather station. The setup is the same as usual: simply insert the batteries (not included) and install your replacement sensor in the desired location using the mounting materials provided. Once you've installed the sensor, all you need to do is connect it to your existing base station (not included). Simply press the Wi-Fi/Sensor button on the base station, and the base station will search for the signal from your new outdoor sensor. The two devices will then automatically connect to each other. The local data from your sensor, including the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity will appear on your elegant colour display. Restore full functionality to your Wi-Fi Comfort weather centre with the 7-in-1 replacement sensor. FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) DELIVERY CONTENT Wireless sensor Mounting materials Base station is not included! Instruction manual

This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. Compatible with the following BRESSER weather stations: 7003200, 7003210, 7003220, 7003230, 7002580, 7002585, WSX1001, 7902535, 7902534, 7002541, WSX3001, 7003500, 9080600, 7002586, 7006300, WSH4102, 7003600, 7003300, 7003510, WSX5003, 7003100, 9080800 FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Perfect for your living room, bedroom or even a neighbouring flat: with this additional base station for the BRESSER 6-day 4CAST PRO Wi-Fi Weather Station, your local readings will always be within view. Simply pair the station with your solar-powered outdoor sensor (not included), and the measurements for temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity will be displayed on the large and stylish colour screen. You can also connect the station to the Internet and the ProWeatherLive server to obtain a 6-day weather forecast and information on visibility and cloud cover. Additional base station – more space for your weather data In addition to displaying data, the additional base station can also take its own measurements of the ambient indoor conditions. Thanks to the built-in sensor, it can measure the indoor temperature, humidity and air pressure for your current location. It also features a comfort indicator for the indoor climate. When a smiley face is displayed, no action is needed. Otherwise, you’ll need to monitor the conditions or take action to prevent mildew or dry air. Of course, the additional base station also displays all important data on the sun, wind and other weather conditions that you’re used to seeing from your solar weather station. For example, measurements such as the perceived temperature, sunburn time in minutes and the Beaufort index can help you to choose the right clothes before heading out for the day. There is also a maximum/minimum memory to give an overview of the recent weather conditions. Perfect timing from morning till night The base station is ideal for bedrooms – thanks to the built-in alarm with snooze function, you’re guaranteed to wake up on time. There’s also a practical function for cold winter days: if you enable the frost alarm, the alarm goes off 30 minutes earlier when the temperature drops below -3 °C, giving you plenty of time to get to work or school safely. In addition, the time, date and day of the week are synced automatically via the Internet and displayed on the screen. If you enjoy observing the moon, you will also find the current moon phase displayed as a graphic at the top of the screen. The additional base station also displays the sunrise/sunset and moonrise/moonset times. More space for your weather data: View the weather data from your BRESSER 6-day 4CAST Weather Station in additional room or apartment with this additional base station. FEATURES 6-day weather forecast (today and 5 following days) Wi-Fi connection for sharing local weather data on portals such as ProWeatherLive and AWEKAS Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Large colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 215 x 176 x 25 mm DELIVERY CONTENT Base station Power adapter External sensor not included! Instruction manual

The BRESSER MyTime Bath Clock impresses with it's modern design. The simple dial is a nice contrast to the seconds hand in red. The clock has a classy frame in brushed aluminum. In addition to the time display, this Bathroom clock also features a digital temperature display (°C/°F). Of course, the clock is splashproof and therefore suitable for use in damp locations. It is mounted either on the wall with suction cups or on a flat surface by means of the stand. Rear suction cups and a stand are included.The Bathroom clock is operated with 1 x AA battery and thus can be set up at almost any place.FEATURESRadio controlled clockRoom temperature (°C/°F)SplashproofedSuction cups for wall-mountingStandPowered by batteriesSCOPE OF DELIVERYClockStand4 Suction cupsUser manual

This eyepiece adapter for 36.4-mm to 31.7-mm eyepiece mount is suitable for use with 31.7-mm eyepieces with older Vixen OTAs that are fitted with a 36.4-mm focuser.FEATURESEyepiece adapter 36.4 mm to 31.7 mm Adapts 36.4-mm fittings for mounting 31.7-mm eyepiecesCompatibility: For older Vixen OTAs with 36.4-mm focuser Weight: 29 g PACKAGE CONTENTSVixen reducing sleeve 36.4–31.7 mmDust cap