BRESSER 110-116BM 3 Section Boom Arm
Whether right-angled or as a tripod, this multifunctional boom arm handles even difficult lighting situations easily
- 3 sections cross boom arm with telscopic extension up to 3 Kg
- Right- angled and can be used as a tripod
- 2 Padded handles and spigot connection
- Height 79 cm to 245 cm/ Diameter 25/28 mm/ Weight 1160 g
- Aluminium boom arm and counterweight bag
Product number:
F004395
GTIN/EAN:
4007922065922
WEEE-Reg.-Nr.:
DE 34716369
Bresser Photo Studio Equipment
With Bresser's photo studio equipment, you can create your own studio and bring your creative ideas to life. The range offers everything you need for a professional studio setup: a selection of backgrounds for various uses, studio flashes and continuous lights for optimal lighting, as well as tripods and versatile camera accessories. Whether you're planning product photos, portraits, or artistic shots, the combination of well-thought-out accessories and light control gives you flexibility and control over your image composition – ideal for both beginners and professionals alike.
Discover our guides!
Product information "BRESSER 110-116BM 3 Section Boom Arm"
Your new right hand in the studio: The BRESSER 110-116BM 3 Section Boom Arm scores with its 3 sections and the possibilty to position lamps at right angles. Need a perfect lightning from above? Nothing could be easier, because this boom arm masters even difficult lightning situations in the whole range of video production and photography easily. I supports you in different ways of working: Use it in the possible total length of 245 cm on a tripod with spigot connection, or hold the solidly made boom arm comfortably in your hand with the 2 padded handles and add light formers or microphones. As a boom arm stand, the unit shows its versatility.
3 section boom arm: All good things in three!
Simply threefold practical: the 3 sections can be adapted to suit the current purpose. But they are not only strong as a team, they also do a really good job separately. The telescopic pole, which is held by a sturdy clamp, brings a particulary high degree of flexibilty to the studio. You can extend the telescopic section from 79 to 153 cm and use it with a spigot connection. The main section can be attached to the variable tilt connection and measures 79 cm. And if things do get heavy: The centre piece with the tilt connection ( gallows) is connected with a clamp into which you can insert 2 sections and screw them tight.
This multifunctional extension arm is guaranteed to do a good job in the photostudio and video production, because despite the sturdy construction with a tube diameter of 2,5 cm and 2,8 cm it is a real lightweight with only 1160 g. In addition, the powder-coated aluminium for less relfection is easy to handle. You can ensure the right balance for heavy weight lamps with the supplied conterweight bag. Simply fill the two cpompartments of the bag and with the the practical strap, yu can quickly attach the conterweight to the boom arm.
But notice: For maximum stability the conterweight must correspond to the weight of the mounted studio flash or light shaper!
You should not exceed the realistic maximum load of 3 to 4 Kg when using the extension arm.
PROPERTIES
SCOPE OF DELVERY
3 section boom arm: All good things in three!
Simply threefold practical: the 3 sections can be adapted to suit the current purpose. But they are not only strong as a team, they also do a really good job separately. The telescopic pole, which is held by a sturdy clamp, brings a particulary high degree of flexibilty to the studio. You can extend the telescopic section from 79 to 153 cm and use it with a spigot connection. The main section can be attached to the variable tilt connection and measures 79 cm. And if things do get heavy: The centre piece with the tilt connection ( gallows) is connected with a clamp into which you can insert 2 sections and screw them tight.
This multifunctional extension arm is guaranteed to do a good job in the photostudio and video production, because despite the sturdy construction with a tube diameter of 2,5 cm and 2,8 cm it is a real lightweight with only 1160 g. In addition, the powder-coated aluminium for less relfection is easy to handle. You can ensure the right balance for heavy weight lamps with the supplied conterweight bag. Simply fill the two cpompartments of the bag and with the the practical strap, yu can quickly attach the conterweight to the boom arm.
But notice: For maximum stability the conterweight must correspond to the weight of the mounted studio flash or light shaper!
You should not exceed the realistic maximum load of 3 to 4 Kg when using the extension arm.
PROPERTIES
- Multifunctional aluminium boom arm
- Telescopic function
- Handels for comfortable working
- For photo and video production
- Load capacity from 3- 4 kg
- Can be used as a boom arm and lamp tripod
- High -quality and stable construction
SCOPE OF DELVERY
- 1x Boom arm with 3 sections and spigot connection
- 1x Conterweight- sand bag with velcro fastener
- 2x Nylon bag for sand
| Batteries required: | 0 |
|---|---|
| Colour: | black |
| Compass: | 0 |
| Height (cm) from: | 90 |
| Height (cm) up to: | 245 |
| Height, folded (cm): | 90 |
| Load capacity (kg): | 3 |
| Material: | Aluminium |
| Net weight (without access.) (g): | 1160 |
| Total length (mm): | 900 |
| Total width (mm): | 70 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Follow instructions! Always read and follow the instructions before use.
- Avoid falling hazards! Ensure secure placement.
- Avoid moisture and heat! Rain, high humidity, and extreme temperatures can damage the product.
- Maintain a safe distance! Lamps and flashes can become hot keep them away from flammable materials.
- Risk of tripping! Position cables so they do not create obstacles or become damaged.
- Safe use of batteries! Use only suitable batteries and avoid overcharging.
- Safe transport! Protect accessories in bags or cases.
- Secure attachment! Check that all parts are securely fastened.
- Electrical hazard! Switch off the device before cleaning or making adjustments.
- Safe use! Only use the product as described to ensure safety and functionality.
Accessories
BRESSER BR-TP400R Lightstand 400cm
€45.00*
A strong and stable aluminium light stand which can be folded easily to compact dimensions. There is an air suspension system in the tripod, which can stabilize any vibration caused by lowering the flash head. To prevent any reflection the aluminium is provided with a black powder coating.FEATURESaluminium light standair suspension system for shock absorptionblack powder coating to prevent undesired reflections adjustable height: 134 - 400 cmSCOPE OF DELIVERY 1x light stand1x spigot adapter (1/4" male, 3/8" male)
BRESSER Profi BR-C30 Heavy Duty Combo Stand - 300cm
€159.00*
Discover unmatched stability with the BRESSER Profi BR-C30 Heavy Duty Combo Stand. With a maximum height of 300 cm and a load capacity of up to 20 kg, this robust stand offers full freedom to perfectly position your lighting and equipment. The durable aluminum design and air suspension system ensure smooth height adjustment and maximum protection for your gear.
Lightweight and foldable, it is ideal for both studio and on-location work. Whether you are a professional photographer or an enthusiastic amateur, this versatile stand elevates your creative possibilities to the next level.
FEATURES
Maximum height of 300 cm for various applications
Load capacity of 20 kg for heavy equipment
Durable aluminum construction
Foldable for easy transport
SCOPE OF DELIVERY
Bresser Profi BR-C30 Heavy Duty Combo Stand
Similar products
BRESSER SBP01 Paper Background Roll 2,72 x 11m Arctic White
€89.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White?
Both colours can be described as white. Yet, arctic white is a little brighter whereas polar white has a warmer shade.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
BRESSER SBP01 Paper Background Roll 2,00 x 11m Arctic White
€79.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.What’s the difference between Polar White and Arctic White?
Both colours can be described as „white“. Yet, „arctic white“ is a little brighter whereas „polar white" has a warmer shade.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).
Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
BRESSER SBP02 Paper Background Roll 2,72 x 11m Black
€89.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).
Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESStrong background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrgound roll
%
BRESSER BR-225B LED Daylight-Set
€85.09*
€99.00*
(14.05% saved)
A space- and energy-saving complete solution for setting up a photo studio or video studio.With the practical BRESSER BR 225B daylight set including insensitive and long-lasting 50W LED lamps, you will achieve an even and natural illumination of your product photos and portrait shots. And with the colour temperature of 5500K, you can also create a perfect daylight atmosphere for your video recordings.At home or on location, you are immediately ready to go with this set. It consists of two 50 x 70 cm umbrella softboxes including external diffuser and two tripods with a maximum height of 75 to 180 cm.The permanent lights are quickly stowed in the bag and just as quickly set up. This makes the set perfect solution for photography beginners or vlogger and blogger who want to turn their living room into a studio.PROPERTIESComplete LED daylight setIdeal for product photography, portrait photography and videographyEnergy-savingSoftbox 50 70 cm with external diffuserNatural daylightCRI>85Compact tripods with fixed spigotComplete with carrying bagSCOPE OF DELIVERY2x BR-225B Softbox 50 x 70 cm2x BR-225B external diffuser2x LED 50 W/ E272x Lamp tripod 180 cm1x Transport bag
BRESSER BR-LP10 Lens Cleaning Pencil
€2.75*
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the BRESSER BR-LP10 lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side.
FEATURES
lens cleaning pencil for safe cleaning of optical and coated glass
brush to remove dust on one sidepolishing pad on the other side
SCOPE OF DELIVERY
1x lens cleaning pencil
%
BRESSER BR-230B LED Daylight Set
€121.09*
€129.00*
(6.13% saved)
Are you looking for a space- and energy-saving complete solution for setting up a photo or video studio?With the compact BRESSER BR-230B daylight set including insensitive and long-lasting 50W LEDs, you will achieve an even and natural illumination of your product photos and portrait shots. And with the colour temperature of 5500K, you can also create a pleasant daylight atmosphere for your video recordings.In the studio or on location, you are immediately ready to go with this set. It consists of three 50 x 70 cm umbrella softboxes including external diffuser, three tripods with a maximum height of 75 to 180 cm and an extension arm with connecting piece.The extension arm allows you to set light from above- for a great hair light in portrait photography. Or you can use it as an overhead light to avoid cast shadows in product photography. The extension arm can be extended from 75 to a maximum of 140 cm and gives you more freedom of movement even on the smallest set. It also impresses with its easy handling.The entire daylight set is quickly stowed in the bag and just as quickly set up. This makes it the perfect solution for photography beginners or vloggers and bloggers who want to turn their living room at home into a studio.PROPERTIESComplete LED daylight setThree-point lightningSimple extension armIdeal for product, portrait and video photographyNatural lightCRI value> 85Compact tripods with spigotComfortable carrying bagSCOPE OF DELIVERY3x BR-230B 50 x 70 cm umbrella softboxes3x BR-230B external diffusor3x Lamp holder with power cable3x Bresser LED 50W/E273x Lamp stand 180 cm1x Boom arm1x Booam arm coupling1x Counterweight (sandbag)1x Transport bag
BRESSER BR-21 Gooseneck with table clamp/ tube clamp and spring clamp
€18.00*
Whether in the photo or film studio, or for camping and leisure, the BRESSER BR-21 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two different clamps, the flexible arm is quickly and flexibly attached to table tops or tripos.The stable and flexible component has a total length of 43 cm and can be stowed away quickly to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER Gooseneck cannot hold. The rubberised screw clamp with an opening of 0,5 to 3,5 cm can also be mounted on tubes and rods, microphone stands or lamp tripods. The rubberised spring clamp with its robust width of 7,5 cm has a maximum opening of 5 cm. Conveniently, the BRESSER BR-21 can also be used in reverse. The spring clamp can be used as a table clamp and screw clamp can be used as a holder for tubes, rods ect.NOTE: The load capacity of approx. 1-2 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm 43 cm/ Ø 15 mmTotal length: 62 cmMetal clamp with strong spring on one side, screw clamp on the other sideRemoveable rubber lipsSpring clamp opnening: max 5,5 cmClamp width: 7,5 cmTube clamp width: 4 cm/ length: 5 cmScrew clamp opening: 0,5 cm - 3,5 cmLoad capacity: max 1-2 kg, depending on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-21 Flexarm
BRESSER SBP02 Paper Background Roll 2,00 x 11m Black
€79.00*
BRESSER background paper is characterized by its excellent quality. With a weight of 160 gram per square meter, the BRESSER background paper is very heavy. The surface has a minimal structure and it's anti-reflective. Because of the ultrafine processor controlled production, the colour quality and colour equality are guaranteed for the whole roll.The background paper is wrapped around a strong cardboard core which fits without sagging on every background system. The core has an inner diameter of 48 mm.
OUR RECOMMENDATION
A taut background, without the lower end of the roll rolling up again by itself, is achieved with the help of the optionally available weighting bar (art.nr. F004394).
Note:The colours shown on the screen may differ slightly from the actual colour. This may be related to the setting of the particular screen.
FEATURESSolid background paperSurface with minimal structureNon reflectiveStrong cardboard core prevents roll from saggingSCOPE OF DELIVERY1x Paper backrground roll
BRESSER BR-LP15 Cleaning kit - 3 parts
€4.95*
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
BRESSER BR-20 Gooseneck with clamps
€16.00*
Whether in the photo or film studio, for camping or leisure activities, the BRESSER BR-20 gooseneck is always a good helper for attaching photo studio accessories and other utensils. With two sturdy spring clamps, the flexible arm is quickly and flexibly attached to table tops or tripods.The flexible part measures 43 cm in length and with a total length of 64 cm, the gooseneck can be quickly stowed away to save space. Books, reflectors, microphones, leisure equipment and much more - there is hardly anything that the BRESSER BR-20 Gooseneck will not hold. The rubberized spring clips with a width of 7,5 cm and an opening of up 5 cm can also be attached to tubes and rods, microphone stands and lamp tripods.NOTE: The load capacity of up to 1 kg depends on the angle of inclination and may therefore vary.PROPERTIESFlexible bendable arm: 43 cm/ Ø 15 mmTotal length: 64 cmRemovable rubber lipsSpring clamp opening: max. 5,5 cmClamp width: 75 mmLoad capacity: max. 1 Kg, dependig on angle of inclinationSCOPE OF DELIVERY1x BRESSER BR-20 Flex Arm
BRESSER TR-672AN Traveler Tripod with 3-Way Head
€35.09*
The BRESSER Traveler photo tripods are sturdy lightweights for outdoor use! Landscape photographers will appreciate the advantages of these tripods just as much as nature observers. The three tripod legs can be adjusted individually in length thanks to the practical quick lock. The rubber feet can be angled as needed. Thus, you'll get a stable stand even at slopes and on uneven ground. Ideal for photo shoots in the great outdoors!360° images are no problem with the 3-way tilt head. By means of the handle it can be rotated smoothly and jerk-free 360°. Additionally the camera can be tilted up to 90° over two axis. A built-in bubble level and circular bubble level provide for the necessary precision. You want to change quickly between cameras with different objective lenses? With the quick release plate this is no problem!FEATURESparticularly lightweight and transportable photo tripodsuitable for cameras and spotting scopes up to a total weight of 5kgcontinuously height adjustable from 62 cm to 170 cm3-way pan head with quick release plate1/4" photo screwintegrated bubble level and circular bubble levelindividually adjustable tripod legs for uneven groundshand crank for central columnhook for attachment of counterweight sandbags for more stabilitySCOPE OF DELIVERYPhoto tripod with 3-way headQuick release plateTripod bag with shoulder strap
BRESSER BR-LP20 Cleaning kit 4-piece
€4.95*
The BRESSER BR-LP20 cleaning kit is designed for thoroughly cleaning equipment and lenses. This set contains four handy cleaning tools:
Rubber blowerWith this, you can blow dust and small particles off the lens or camera without touching it. This prevents scratches or damage that can occur from direct contact.
BrushA soft brush for removing more stubborn dirt that is not easily blown away. It is designed to be soft enough to avoid causing scratches.
Cleaning fluidSpecial fluid for cleaning the lens without leaving streaks or residue. Although the fluid is not harmful, it is advised to avoid inhalation and contact with eyes and skin.
Microfiber clothA soft cloth used in combination with the cleaning fluid to wipe the lens or camera clean. Microfiber is ideal for absorbing grease and fingerprints without scratching the surface.
This set is an essential toolkit for photography enthusiasts who want to keep their equipment in top condition. Using the right cleaning tools like these helps to extend the lifespan of your equipment.
SCOPE OF DELIVERY
1x Rubber blower
1x Brush
1x Bottle of cleaning fluid
1x Lint-free cloth
Customers also bought
BRESSER BR-RH400 Lightstand with Swifel Arm / Reflector holder
€69.95*
One tripod - many possibilities.This strong and stable aluminium lamp tripod is the perfect assistant in the photo studio. It can be used as a lamp tripod for studio flashes or LED lamps, or as a reflector and diffuser holder. The BRESSER BR-RH 400 offers a high degree of stability and can still be folded quickly for use on location.PROPERTIESAluminium lamp tripodMax. Tripod height: 200 cm of 2 sections (30 mm/ 25 mm) Length of swivel arm of 2 sections (25 mm/ 20 mm)Folded height: 120 cmMax. tube diameter: 30 mmDiameter of stand: 110 cmWeight: 3.1 kgSCOPE OF DELIVERYLamp tripodReflector holderSpigot
BRESSER BR-52 Studio Clamp DE LUXE 2" (10 Pieces )
€7.95*
The universal BRESSER multi clamps are available in a wide range of sizes and are absolute all-round talents in your photo studio. Especially on background rolls, the clamps quickly show what they are capable of: simply clamp them in one movement and the paper or vinyl background is fixed and no longer rolls away uncontrollably.They can also be used to attach fabrics and decorations to the crossbar of your background system or reflectors and diffuser to tripods.The multi-functional clamps can also be used to adjust the one or other garment that is too big for the fashion shoot. The movable red clamps always ensure a good grip and balanced pressure so that no marks are left behind.But not only in photography, but also in the private sphere, for hobbies and handicraft work, the clamps keep their promise - and so particularly firmly.Because the handy helpers are equipped with a very strong spring. Fasten the torch to the tent pole when camping, fix the bird house you built yourself to dry - no problem with the versatile BRESSER multi clamps!PROPERTIESStrong springMovable clamping jawsSize: 6.5 x 5.5 cmOpening (max): 2.7 cmWeight: 8g eachSCOPE OF DELIVERY10x Studio clamp 6.5 cm
BRESSER Quick Lock 35x160 Softbox
€99.00*
The Bresser Quick Lock 35x160 Softbox, also known as a striplight, makes working with soft, professional lighting easier than ever. This softbox is a must-have for photographers and videographers working in portrait, product, or fashion photography. With the ingenious Quick Lock System, you can set up the softbox in just a few seconds and take it down just as quickly. This innovative snap-into-place design not only saves time but also makes the setup surprisingly easy, even during busy shoots.
Its elongated design offers soft, even lighting, ideal for minimizing harsh shadows and creating a professional look in portraits, product photography, or cinematography. Thanks to the narrow, focused light beam of 35x160 mm, this striplight is particularly suitable for highlighting specific details such as contours or edges, enhancing the dimension and depth of your visual material.
The interior of the softbox features a reflective silver lining that maximizes light output and provides impressive highlights. With its generous dimensions of 35x160 cm, the softbox delivers beautiful, enveloping light quality that illuminates your subject in the most flattering way. The inner and outer diffusers are removable, giving you full control over brightness, contrast, and the degree of light diffusion, without unwanted hotspots.
Compatible with the popular Bowens Mount, this softbox fits almost any flash head, monolight, or daylight lamp. Additionally, a grid is included as standard, allowing you to direct the light forward and prevent light spill at the edges. This increases contrast and sharpness between the subject and the background, making it ideal for portrait photography.
The Bresser Quick Lock 35x160 Softbox combines functionality and high-quality light performance in a compact solution, allowing you to achieve spectacular results in any photoshoot with ease.
FEATURES
Quick Lock system for easy setup
Provides even and soft light
Soft transitions to shadows
Narrow, focused light beam
Durable and reliable design
Bowens speedring compatible
Silver interior
Includes outer and inner diffuser
Grid attachment with Velcro
SCOPE OF DELIVERY
Bresser Quick Lock 35x160 Softbox
Bowens Speedring
Grid with Velcro attachment
Inner diffuser
Outer diffuser
Carrying bag
BRESSER BR-D36 Backgroundsystem 300 x 300 cm
€129.00*
The BRESSER D-36 background system offers various possibilities of use, whether in the studio or easy and compactly stowed away for use on location.In the twinkling of an eye, the telescopic crossbar can be adjusted from 115 - 300 cm to the corresponding width of the desired background. The sturdy aluminium lamp stands allow use of various photo backgrounds such as background fabric, paper and also vinyl rolls.The BRESSER BR-D 36 background system can be stowed away quickly and space-saving with the transport bag included in the scope of delivery and still impresses with its stable design and easy handling.PROPERTIESVersatile background systemAir-cushioned, powder-coated lamp tripodsTelescopic crossbar with swivel lockVaraible width: 115 - 300 cmTripod height: 110- 300 cm1/4" and 3/8" spigot adapterSCOPE OF DELIVERY2 x Tripod1 x Telescopic crossbar1 x Bag
%
BRESSER BR-D3500SL COB LED Studio Light
€812.89*
€899.00*
(9.58% saved)
A masterpiece of COB LED studio light technology, the BRESSER BR-D3500SL daylight lamp will inspire every professional in the field of film and video recording.It convinces in a compact and robust design with a fabulous output of 350 W. In addition, the separation of power supply unit, control panel and housing has made it possible to design a cooling system that is virtually noiseless even at maximum output. And this with increased stability and simplified control options.The monobloc luminaire with a colour temperature of a convincing 5600 K can be easily adjusted from 10 to 100% at the control unit or via the remote control supplied. With a colour index of CRI 96+, a natural light atmosphere is created.Hollywood effects desired?Then the absolute highlight of the BRESSER BR-D3500SL COB LED light are the 5 pre-programmed and dimmable light effects. They can be selected simply by pressing a button: Paparazzi, Fireworks, Warning, Thunder and TV. These effects provide that certain something for video recordings and also at events.And if it should be a photo shoot: no problem!The S-bayonet connection leaves all possibilities open. Various light shapers can be used, or reflective or translucent umbrellas can be inserted into practical U-bracket.With optionally available rechargeable batteries, the separate control box can be used for power supply indoors or on location to avoid cable clutter and problems caused by power failures. There are 2 V-lock connections for this purpose. All operating parameters can be easily checked on the disply of the control box. On top of that, the 2.4 GHz remote control with 99 programmable channels can be used to control all settings of the LED daylight luminaire even from a distance of up to 30 m.PROPERTIESCOB LED monobloc350 W power31500 lumensHigh CRI of 96+High qulita aluminium housingLow noise cooling2 x V-Lock connectiors2.4 GHz remote control5 light effectsS-bayonet connectionSCOPE OF DELIVERY1x BRESSER BR-D3500SL COB LED1x Protective cap1x Control unit1x Mains cable1x Connection cable1x Standard 65° reflector1x Remote control1x Transport bag with carrying strap
BRESSER BR-05B Space Arm for Lightstands including Multiclamp
€79.09*
The 121 cm long swivel arm with two hinges consists of two solid metal bars, each of which is 60.5 cm long.You can therefore choose to use only the front bar, which is equipped with a spigot adapter with a 1/4 external thread and one hinge.The swivel arm can be secured to a lamp stand with a spigot adapter and used as an extension or a boom arm. Thanks to the multi clamp that can support loads of up to 12 kg, it can also be secured to tabletops, shelves and pipes with a diameter of 2-10 cm.FEATURES OF SWIVEL ARMTwo-section swivel arm, can also be used individually2 hinges, adjustable in steps with safety latchCan be used as extension or boom arm for lamp standsSpigot adapter with 1/4 external threadSolid metal, 28 mm in diameterLoad capacity: 2.5 kgTotal length without spigot adapter 121 cmFEATURES OF MULTI CLAMPRobust metal multi clampThree 5/8 spigot adapter, one with 1/4 threaded screwMaximum load capacity: 12 kgFor attachment to poles, posts, pipes with a diameter of 2 to 10 cmDELIVERY CONTENT2-section swivel arm 1 multi clamp