EXPLORE SCIENTIFIC Telescope Case ED-APO & AR 127s/152s

The compact versatile EXPLORE SCIENTIFIC soft-sided case is one of the most versatile storage solutions made. It’s the perfect combination of protection and organization for everything from Explore Scientific eyepieces to the smallest batteries, cables and accessories. The walls and dividers are made with a layered combination of protective EVA foam and rigid PE board to keep contents safe (and from shifting between compartments) inside any bag.  FEATURESCompact versatile soft-sided caseProtection and organization of accessoriesFor eyepieces, filters, batteries and cablesWalls and dividers of protective EVA foamNo shifting between compartmentsKeeps the contents safe  Length 22 x 19 x 8cm; Weight 0,5 kgSCOPE OF DELIVERYaccessory soft case with protective dividers

Special transport case for the VSD90SS astrographThis is a hard-shell case that was developed exclusively for the VSD90SS. You can store the VSD90SS tube either without the tube clamp or with the tube clamp attached. When the VSD90SS is stored in the case, there is enough space around the focuser to store accessories for photography.The inside of the case is designed so that the VSD90SS can be used as soon as it is removed from the case. You can store not only the tube of the VSD90SS, but also the tube clamp. There is enough space for accessories on the side of the case facing the eyepiece to make it easier to keep them handy at the observation site. For example, the reducer V0.79x, wide-angle photo adapter 60DX or an electric focuser from ZWO can be stored.The housing of the case is made of lightweight and hard-wearing Plapearl material. The flexible properties of Plapearl allow for a special construction that reduces the weight by more than 30 % compared to an equivalent aluminium case. Thanks to the seamless construction, with the exception of the opening, the housing is also extremely airtight. Plapearl is lightweight, durable, has excellent flexural rigidity and is easy to recover from impact.FEATURESCase material: PlapearlDimensions: 556 x 245 x 256 mmWeight: 2.4 kgSCOPE OF DELIVERYVSD90SS transport caseCustom-fit padding insertsKey 2x

Stay on top of the weather! The BRESSER Wi-Fi HD TFT 7-in-1 Professional Weather Station displays the temperature, humidity, wind speed and more. The HD TFT screen shows the comprehensive data from the 7-in-1 external sensor and up to 7 additional sensors (not included) in a wide variety of display modes. Easily switch between the start screen, detailed display, data log and more at the touch of a button! Thanks to the intuitive step-by-step interface, you can choose which measurements you want to view and how long you need them, either in a light or dark display design. Wi-Fi weather station: no more getting caught in the rain! No one likes to arrive at an important meeting soaking wet or get sunburned while working in the garden. With this weather station, you can do a quick weather check before leaving the house. The start screen shows you all up-to-date weather data, including a reliable graphic weather trend forecast, the UV level and the light intensity. It also displays the 'Feels-like' temperature, which is particularly practical for people who are sensitive to the weather. This function shows you how warm or cold it feels outside, based on your local measured values for wind, temperature and humidity. Other standard weather readings such as precipitation amount and rate, air pressure, wind speed and wind direction can also be found on the intuitive display. The Wi-Fi weather station for more than just the here and now The weather station shows a wide range of readings, including temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. But what about weather trends? After all, you can only decide whether the garden hose needs to be rolled out again if you know the amount of rain that has fallen in the past few hours. The detailed display adds a wealth of measurements to the start screen, such as the amount of rain during the last hour, 24 hours and the last month.However, when it comes to your local weather history, the weather station can do much more: You can also check the daily max. and min. values on the display, either in a table or a graph. If this isn't detailed enough, you can use the data log function, which records measurements at intervals of 5, 10 or 30 minutes. Perfect for hobby meteorologists who want to immerse themselves in data on the display or on their own computer! View your weather data in more rooms with additional sensors The weather station comes with a 7-in-1 sensor and a thermo/hygro outdoor sensor. However, sometimes two wireless sensors are just not enough. Do you ever struggle with mildew in your kitchen or bathroom? Have you ever turned up the heating in winter, only to discover that the air literally dries out? Regardless of the answer, it's always worth keeping an eye on the indoor climate in different rooms. If you have an outdoor pool, you can use a pool thermometer (not included) to check that the water is at an optimal temperature. For all this and more, you can connect up to 6 optional additional sensors to the base station of the Wi-Fi weather station. Just look in the Accessories tab to view a list of compatible devices. Once you've connected all the wireless sensors, the measurements are shown side by side on an intuitive start screen, which allows you to read and compare the temperature and humidity readings and trends for your kitchen, bedroom, or other rooms. You can also check the soil moisture and temperature with an optional soil sensor (not included). In addition, you can give each sensor a name to ensure that you keep track of the different locations. Smart technology In today's world, everything is networked. The weather station also has a number of connectivity functions to allow you to stay on top of the weather. You can register your new weather station with our partner, the German weather platform AWEKAS, free of charge. The weather station also supports the popular international platforms ProWeatherLive, Weather Underground and Weathercloud. You can also connect your weather station to your other favourite sites. This allows you to access the local measurement data from your Wi-Fi weather station from anywhere in the world. If you worry about your garden when you go on holiday, you can go online to check the weather conditions back home, and then ask your neighbours or friends to water the plants. If you have a smart home, you can also water your plants automatically. Simply use AWEKAS to transfer your measurement data such as temperature, humidity, wind speed and amount of precipitation directly to your smart home control unit. For example, you can set up your lawn sprinkler to be activated automatically when the lawn is dry, or configure your house to maintain an optimal indoor climate. Simply go to the following link and connect your weather station to AWEKAS: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Built-in clock and alarm In addition to the local weather, the HD TFT display also shows you the time, day of the week, date and moon phase. Too early, or time to get up? Just take a look at the bottom of the screen! The weather station also helps you to decide what to wear for the day ahead: wake up to the built-in alarm and use the weather trend forecast to choose the right outfit. There is also a special feature for icy weather: if you activate the frost alarm, the alarm clock will ring 30 minutes earlier on icy days. In addition, the Wi-Fi weather station calculates and displays the local times for sunrise and sunset, as well as for moonrise and moonset. Keep on top of the weather with the Wi-Fi HD TFT 7-in-1 professional weather station! BASE STATION FEATURES 7-inch HD TFT display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Transmits data to the German weather platform AWEKAS via Wi-Fi Publish weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud and 1 additional user-defined platform) Displays the weather trend as a graphic (24 hours / 30 days) Historical data log, exportable to USB drive (not included) Indoor temperature (°C/°F) and humidity with trend Displays the outdoor temperature (°C/ °F) and humidity with trend Displays the amount of precipitation (current, last hour, last 24 hours, last month) Gusts and average wind speed Colour indicator for the wind speed level Displays the Beaufort scale (scale for classifying the wind speed) Displays the wind direction (current and predominant, 16 directions) Displays UV level Displays light intensity Weather forecast Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory (daily/total) Weather data calibration High/low alarm function Individual naming of the additional sensors Synchronization with Internet UTC time with time zone selection Alarm clock with volume control and ice/frost warning Time, calendar, day of the week and moon phase display Sun-/moonrise, sun-/moonset Choose between dark or light display Display brightness and contrast can be customized, day and night mode 6 selectable display languages (EN, DE, FR, IT, ES, NL) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: power adapter, 1x CR2032 back-up battery (included) Dimensions: 190 x 140 x 19.5 mm / Weight: 325 g FEATURES OF 7-IN-1 OUTDOOR SENSOR Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Can be mounted on a wall or post with the supplied adapter Power supply: 3x AA batteries (not included), additional solar panel to extend the battery life Dimensions: 225 x 170 x 410 mm / Weight: 533 g THERMO-HYGRO SENSOR FEATURES Measures the temperature and humidity Transmission range of up to 150 metres Power supply: 2x AA batteries (not included) Dimensions: 60 x 113 x 39.5 mm / Weight: 126 g DELIVERY CONTENT Base station with power adapter 1x wireless 7-in-1 professional weather sensor 1x Thermo/hygro sensor 1x CR2032 back-up battery Manual

Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Well-packed and quickly shouldered - here everything finds its placeThe BRESSER BR-B98 studio bag is a perfect and handy companion for photo studio equipment with variable inner walls. The high-quality material ideally protects sensitive photo studio equipment such as lamp tripods, flash heads and studio umbrellas from dust and light moisture. Everything can be quickly stowed and shouldered in the well-padded transport bag with its large opening and parallel zip.There is enough space in the outer compartment for smaller accessories such as cables, filters or radio triggers. With the adjustable tension straps of the BRESSER BR-B98 studio bag, everything can be lashed down securely, even if the space is not fully used.FEATURES Large, spacious carry bag for studio equipment Parallel zip with large opening for easy packing and unpacking Fully padded Includes dividers (24 x 24 cm) to create separate inner compartments Additional exterior compartment for small accessories Handles and length-adjustable shoulder strap Integrated compression straps Made from water-repellent nylon WHAT’S INCLUDED1x Studio bag 3x Dividers (24 x 24 cm)