The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)
Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa
300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.You can use 2" eyepieces with this adapter at:• LUNT H-alpha telescopes (not at LS35THa!)• the blocking-filters of LUNT H-alpha filter systems• LUNT Ca-K modules• all telescopes/adapter with T2 male threadTechnical data:• Thread at telescope-side: T2 female thread• Eyepiece connection: 2"Delivered by order:• Adapter T2 to 2"(Blocking Filter not included)
The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise. With the laser you collimate your optics even in the dark without additional accessories. Precisely machined it fits a 1,25" focuser without tilting. The built-in projection area enables collimating even long focal length scopes in a breeze. Suitable for Newtonian, Schmidt-Newtonian and Maksutov-Newtonian teleskopes.
FEATURES31.7mm(1.25") Eyepiece Barrel Diameter Machined anodized aluminum housing with all internal surfaces coated non-reflective flat blackBuilt in laser collimatableIMPORTANT: Laser products have to be kept out of reach of children!
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
Universal dovetail clamp suitable for all optical tubes which are equipped with a standard 44mm dovetail rail (Messier/ES/GP/Vixen). Also a screw kit is included for mounting the dovetail clamp direct on the top of the handle of all BRESSER Messier und EXPLORE-SCIENTIFIC telescopes. Thus a parallel mounted guiding telescope can be set up very easy and enables long exposure astrophotagraphy with autoguiding. The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 additional 1/4" photo tapped holes at 120 degrees angular distance on a pitch circle diameter of 55 mm to allow a versatile adaptation to a variety of other telescopes and adapter plates.FEATURESUniversal dovetail clamp Suitable for 44mm dovetail rail of Messier/ES/GP/Vixen Screw set for Messier/ES handle included For piggy-back mounting of a guiding telescope Enables astrophotography with autoguiding CNC machined Aluminum Additional 1/4" photo thread holes available SCOPE OF DELIVERY Dovetail clamp Screw set (2pcs M6x25mm)
At very cold temperatures, blocking filters may no longer work accurately central in the H-alpha wavelength, which means that the details on the sun become less visible. With this Heating-Module you can counteract this effect and observe the sun in the H-Alpha line optimally even at cold temperatures.The Heating-Module is for use with blocking filters in 90° star-diagonal housing from Lunt Solar Systems. It cannot be used at blocking filters in straight extension tube.The Heating-Module has an internal battery which allows for about 1 to 1.5 hours of operation. The battery can be recharged with the supplied USB cable.FEATURESAllows optimal observations in the H-alpha line even at very cold temperatures with blocking filters from Lunt Solar SystemsOperating time about 1 to 1.5 hoursInternal battery can be charged via USB cableCan also be used as a portable charger to power small electronic devicesInput (IN): 5V 2AOutput (OUT): 5V 2ACapacity: 5000mAhSCOPE OF DELIVERYLSBHEATER Heating-Module for Blocking-FiltersMounting screwsHexagon wrenchUSB cableInstruction manual(Blocking-filter not included!)
Vixen Tube Clamp 115s for VSD90ss This high-quality tube clamp made in Japan is used to mount the VSD90ss f 5.5 astrograph. The base plate has M6 and M8 holes and can therefore be used on almost all mounts.FEATURES Supplied with various holes as standard High-quality CNC-milled aluminium tube clamp with non-slip locking screw Felt on the inside, prevents scratches on the VSD tube Threaded screw holes bottom: M8 holes x 2 (spacing 35 mm), M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch holes x 3 (inside 30 mm), 1/4-inch holes x 3 (interval 30 mm)
Threaded screw holes top: M8 holes x 2 (spacing 35 mm) x 2 sets, M6 holes x 2 (spacing 35 mm) x 2 rows, 1/4-inch hole x 1 in the centre, M4 holes x 2 (spacing 20 mm)
Dimensions: 162 × 71 × 155 mmSCOPE OF DELIVERY VSD tube clamp
This carrying handle is suitable for installation on BRESSER MESSIER 6, 8 and 10 inch Dobson telescopes. In combination with the optionally available prism rail (GP standard) Art. No. 4940140, these Dobson telescope tubes can be used on any telescope mount with the appropriate carrying capacity. A comfortable transport of the tube is guaranteed by the mounting in the center of gravity. The carrying handle is also suitable as a spare part for all other MESSIER telescopes.
FEATUREScarrying handle for 6 , 8 and 10 inch MESSIER Dobson telescopeswhen using telescopic tubes on EQ mountsconvenient transport due to central assemblythe assembly is carried out on the original tube ringsalso suitable as spare part for all MESSIER telescopesassembly material and tools includedlength: 190mm; Width: 30 mm; Height: 38 mmbore spacing: 160 mm; Bore diameter: 6.5 mm
SCOPE OF DELIVERYcarrying handlemounting screws (2 pieces; 1/4 inch)hex wrench tool (3/16 inch)
Universal mounting rail for mounting a photo camera on an EQ mount with Vixen GP mount for astrophotography. The EXPLORE SCIENTIFIC camera dovetail rail is made of die-cast aluminium. The dovetail-shaped mounting rail is 45 mm wide (similar to the Vixen dovetail style) and 280 mm long. The matt black anodized surface has a laser engraved scale on one side with a fine graduation with 2 mm increments. This makes it easier to determine the center of gravity when placing the camera on the mounting head. To protect the clamping surface there is a stainless steel clamping plate on the opposite side. The dovetail plate is equipped with rubber inserts at 3 positions. This allows a secure mounting of the camera equipment and prevents unintentional slipping and twisting. The mounting rail has a screw fastening with 1/4 inch photo thread, which is suitable for almost all commercially available camera systems. The screw attachment can be used in 3 different elongated hole positions to adjust a perfect balance. In addition, an adapter from 1/4 inch to 3/8 inch photo thread is also included, so that ball heads with the larger thread version can also be used directly. The camera mounting rail weighs only 250 grams. Suitable for all EXPLORE SCIENTIFIC and BRESSER mounts and also mounts of other brands that accept the popular Vixen-GP dovetail rail. FEATURES Universal camera mounting rail Dovetail with 45 mm
width Length 280mm; weight 250 grams Suitable for EQ mounts with Vixen GP dovetail Camera mounting screw with 1/4 inch photo thread Thread adapter 1/4 inch to 3/8 inch Laser engraved scale with 2 mm fine graduation Stainless steel clamping plate Rubber inserts against slipping and twisting 3 elongated holes for mounting the camera SCOPE OF DELIVERY Camera mounting rail Mounting screw 1/4 inch Thread adapter 3/8 inch
The perfect LED head torch for nighttime observations!
Adjusting your eyes to the dark surroundings is very important when making astronomical observations.
In dark areas, it is very difficult to use astronomical equipment without a suitable light.
With normal lights, however, the light intensity is more important than protecting your eyes against bright light.
Using these lights at night makes your pupils contract, which can make it difficult for your eyes to readjust to the darkness.
The SG-L01, our first astronomy LED lamp, featured a built-in red LED that provided a solution to this problem.
However, the red light did not offer optimal visibility. On our new astronomy LED light, the SG-L02, the LED lights produce warm light to improve visibility.
They also ensure that your eyes stay adapted to the dark.
The LEDs do not emit light in the sensitive range of 555 nm.
The brightness of the white light can be adjusted between 3 and 42 lumen, while the red light can be adjusted between 0.28 and 7.62 lumen.
FEATURES
Dimmable red light ensures that your eyes stay adapted to the dark
Built-in rechargeable battery, charges via USB
Waterproof design
LED colour can be switched from red to white
0.28 to 7.62 lumen for red light
3 to 42 lumen for white light
Dimensions: 41 mm x 33 mm x 30 mm
Weight: 29 g
DELIVERY CONTENT
SG-L02 head torch
Strap (size S)
Strap (size L)
Pocket clip
Cable for charging the battery (USB-A plug to USB Micro-B plug)
Always keep a cool head when observing the sun with the baseball cap from Lunt Solar Systems. The large shield shades the face well, while vents keep you cool. Made of 100% cotton, with Lunt Solar Systems logo on front.FEATURESBaseball cap with large shieldmaterial: 100% cottonprotects from sunburn while observing the sunadjustable strap with buckle in backSCOPE OF DELIVERYBaseball cap
Single linear 2" polarizing filter.This polarizing filter can be used for example at the Lunt Solar Systems 2" White-Light Herschel-wedge (0558201).The 2" filter can also be used with the BRESSER microscopes 5804000 and 5806100 for the suppression of reflections (eg on metal components, soldering points). It is connected via the M48 thread.FEATURESLinear polarizing filterFilter mount with 2" filter thread (M48)SCOPE OF DELIVERY1x 2" polarizing filter
Vixen SX 125 mm tube ring pair, whiteAttaches telescope (e.g. the Vixen SD and ED 115) to the mountDovetail bar is recommended as optional accessoryFEATURESEnables stable installation of telescope on the mountFelt-lined interiorFor the Vixen SD 115/ED 115Weight: 500 gDELIVERY CONTENT2x Tube clampsScrews
1.25" slide-tube, adapts Lunt Solar Systems 2" blocking-filter in star diagonal to telescopes with 1.25" focuser.FEATURESThread to blocking-filter: T2Length 1.25" slide-tube: 28mmSCOPE OF DELIVERYAdapter 2" LUNT Blocking Filter to 1.25" focuser(Blocking-filter not included)
Can mount a guiding scope, camera, and a ball head for cameras. Can be attached on the upper part of a optical tube ring.
• Size: 191×48 mm
• Weight : 0.276 kg
The Vixen white tube ring pair is designed to support telescopes. The inner sides feature a felt coating to prevent your telescope from getting scratched. The tube rings can be used with the following telescopes: A80M, A80Mf, ED81S and SD81S.FEATURES
Vixen SX 90 mm tube ring pair, white
Felt-lined interior
Compatible telescopes: A80M, A80Mf, ED81S and SD81S
Weight: 350 g
DELIVERY CONTENT
Vixen SX 90 mm tube ring pair, white
Mounting screws
Keep your head covered and prevent sunburn while observing. UV protectant material with small pocket and clip to prevent being blown off in the wind. Cool ventilated design. Neck flap to keep your neck protected while looking through the eyepiece.SCOPE OF DELIVERYSolar Hat with neck flap
Adapter for all LUNT Solar Systems LS60 and LS80 telescopes, for LS100MT telescopes, and all 10", 12", and 16" EXPLORE SCIENTIFIC Ultra Light Dobson, to change the normal Crayford focuser to a Starlight Instruments 2" Feather-Touch focuser.
FEATURES
Adapter to 2" Feather-Touch focuser
Suitable for LUNT Solar Systems LS60THa and LS80THa telescopes, and LS60MT, LS80MT, and LS100MT telescopes
Suitable for all 10", 12", and 16" EXPLORE SCIENTIFIC Ultra Light Dobson
SCOPE OF DELIVERYAdapter LS60/LS80, ES UL Dobson 10", 12" and 16" to 2" Feather-Touch focuser(Feather-Touch focuser not included!)
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Facebook
Vimeo
Dailymotion
Um Videos anzusehen, müssen Sie Cookies von Drittanbietern akzeptieren:
Facebook
Vimeo
Dailymotion
Um Videos anzusehen, müssen Sie Cookies von Drittanbietern akzeptieren:
Facebook
Vimeo
Dailymotion
Um Videos anzusehen, müssen Sie Cookies von Drittanbietern akzeptieren:
Facebook
Vimeo
Dailymotion
Cookies
We use cookies to personalise and improve content and services, deliver relevant advertising and provide a secure experience. You can review your cookie controls at any time. Learn more about the use and control of cookies in our privacy policy.Imprint