%
Vixen Porta II azimuthal mount
€249.00*
€325.00*
(23.38% saved)
The Vixen Porta II is a high-quality azimuthal mount from the award-winning manufacturer Vixen. Featuring an intuitive, versatile and reliable design, the Porta II was specially developed to enable quick and precise telescopic observations along the vertical and horizontal axes without the need for a complex setup. It comes with fine adjustment wheels for fine tuning the position of the telescope to track astronomical objects. It also has a highly portable design thanks to the detachable mount head, which can be quickly detached from the tripod via an M10 screw. In addition, the dovetail mounting system (Vixen standard) ensures maximum compatibility with a wide range of telescopes.
The Vixen Porta II mount in detail
Easy to use
The Porta II does not require a clamp, as it sports a slip clutch that allows you to adjust the mount to your desired object. It also holds its position automatically, making it very easy to use.
Highly portable design
The mount is easy to transport thanks to the Porta II mount head, which can be detached by removing a single screw.
Easy to operateThe Porta II adjustment system allows you to track objects and make fine adjustments using the supplied shafts, which can be repositioned as necessary for optimal viewing comfort.Practical accessory storage
The accessory holder features slots for your eyepieces. It can also be used to store smaller photography accessories. The holder is easy to mount via a centrally positioned screw.
Built-in tool
The mount comes with a tool for adjusting the friction of the slip clutch. The tool is located underneath the rubber cover for easy access.
FEATURES
360° fine adjustment with worm gears2x sprockets with 120 teeth eachNo axle clamp requiredSlip clutch friction systemDovetail system (compatible with the GP and Sphinx mount)
Adjusts by up to 45°
Mounts tubes with an aperture of up to 155 mmPACKAGE CONTENTSVixen Porta II mountAluminium tripod2 fine adjustment wheelsMounting toolStorage shelf for accessories
BRESSER Micro Motion Head MH-100 (Polar-Wedge)
€85.00*
Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual
BRESSER StarTracker Astronomical Photo Mount PM-100
€349.00*
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ?
All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable.
The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly.
After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.) Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual
BRESSER Photo mount with field tripod and wedge
€409.00*
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER photo mount is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain punctiform even with long exposures. Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER photo mount is designed for a camera with lens of max. 2.5 kg total weight to carry and track. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the optical pole finder, this is done quickly. After setting up the light and compact photo mount, simply set the approximate latitude (pole height) to the scale and aim Polaris through the illuminated pole finder scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can also be moved via the hand box with 2- or 32-fold speed in forward and reverse. Thus, the sky section can be adjusted even more precisely. Low power consumption allows up to 50 hours of operation with just one battery charge. The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount and the tripod with polar wedge are also available separately - Product No.: 4964111 and 4964112 FEATURESEquatorial Photo-MountAdjustable stainless steel field tripod with polar wedge and bubble levelAutomatic siderial tracking against the Earth rotation Handbox to control the tracking motors (2x/32x)Suitable for northern and southern henisphereOptical pole finder scope with illumination unit includedBallhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 3/8" threaded bolt for ballhead mountingPhoto-Mount with 1/4" und 3/8" inner threads for tripod mountingHigh precision stepper motor with helical gear for accurate tracking Large screws and handles for easy usage at night Battery operation or stabilized power adapter (optional acc.) Battery life: up to 50 hoursPower connector at handbox: 6 volts DC jack 5.5/2.5mm (positive pole at center pin)Weight Photo-Mont with ballhead: 1.4 kg Weight tripod with polar wedge: 3.5 kgLoad capacity of Photo-Mount: up to 2.5 kg Height of camera sattle plate max. 140 cmSCOPE OF DELIVERYFoto-Mount headTracking motor with HandboxUltra-stable stainless steel field tripod with bubble levelBallhead with quick release saddle plate Pole finder scope with illumination unitBattery compartment 6 volts with case (no D-batteries included)Manual
%
BRESSER EQ-3 Telescope Mount incl. Tripod, black
€108.00*
€135.00*
(20% saved)
The BRESSER EQ-3 is a German equatorial telescope mount that can be used universally for light to medium-weight telescope tubes with a net weight of up to 5 kg.The only requirement for telescope tube mounting is a universal Vixen profile GP dovetail mounting bar - found on many commercially available telescope. This high-quality equatorial mount allows easy alignment to the celestial pole in no time and then allows tracking of all celestial objects manually with its single RA axis. Both RA and DEC axes come with manual slow motion control cables, for easy adjustment of your telescope's pointing. Also included is a sturdy, yet lightweight, aluminium field tripod, which can be individually adjusted in leg height to give you perfect stability, even on rough ground. The included 1.5 kg counterweight is used to adjust the balance between the telescope tube and the mount. Further counterweights can be supplied if needed. NOTE: If you want automatic Right Ascension tracking of celestial targets, this telescope mount can be equipped with the optional motor set Art. 4951400.FEATURESGerman equatorial telescope mountFor light to medium-weight telescope tubes of up to 5 kg net weightUniversal Vixen GP-style dovetail holderEasy polar alignment with adjustable altitude and azimuth axesAllows convenient tracking by slow motion right ascension axisWhat's IncludedBRESSER EQ-3 mountField tripodCounterweight
%
BRESSER Messier RA-Motor + Controller EXOS1 + MON1
€124.00*
€155.00*
(20% saved)
This BRESSER Messier RA-Motor + Controller EXOS1 + MON1 lets you control your Messier telescope. Including controller. Automatic tracking for a more comfortable observation of the night sky.SCOPE OF DELIVERYdrive motor for EXOS-1 and MON-1 mountshand control with 1 cablebattery box with connection cablegear with couplinggear for motor axisAllen screw for motor fasteningscrewdriver
%
Vixen 85 deluxe tangential adjuster
€79.20*
€99.00*
(20% saved)
The best way to get started with long-exposure astrophotography is to mount a 35-mm camera with a normal or telephoto lens. Vixen camera mounts are perfect for this. To attach a camera to your telescope, you will need a 72576 accessory plate or 73548 pipe clamp. With X-Y positioning (+/- 10°):
FEATURES
Precise, controlled adjustment of guide scopes, camera housings or spotting scopes
For mounting on camera mounts or tripodsAdjustment range: +/- 10° in both directionsConnection: 1/4" photo threadWeight: 340 gPACKAGE CONTENTS85 deluxe tangential adjuster
EXPLORE SCIENTIFIC Twilight I telescope mount with tripod
€299.00*
The Twilight I is a light-to-medium-duty alt-azimuth mount and tripod designed to quickly and easily accept small to medium sized refractors, such as the AR102 + AR127s or ED102mm + ED127, and of course, the ED80mm. Lightweight, fast Newtonians will also match up nicely with the Explore Scientific Twilight I mount. As long as your telescope does not exceed 18 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go. The Twilight I alt-azimuth mount head is made of powder-coated aluminum and there are worm gears on both axes. The adjustable angle head can be tilted forward or back at a 45° angle to allow more clearance for your telescope so you can point it straight up for viewing at the zenith. The Allen hex wrench for doing the mount head adjustment can be safely stored at the integrated magnetic holder. Slow-motion control cables are attached on the vertical and horizontal axes, and are easy to turn during the night, even with gloves on, due to the over-sized knurled knobs that are attached to the end of each cable. They can be attached to either side of each axis to accommodate right or left-handed users, or different types of telescopes (e.g. refractors vs. Newtonian reflectors) for ease of adjustment. The stainless steel tripod that comes standard with the Twilight I mount has adjustable legs and a wide foot print of 42 inches, which makes the tripod more stable. A spreader bar locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. SCOPE OF DELIVERTwilight I Telescope MountStainless Steel Field tripod
%
EXPLORE SCIENTIFIC iEXOS-100 PMC-Eight Wifi Goto Mount
€367.20*
€459.00*
(20% saved)
The iEXOS-100 is a complete astronomical computerized Wifi or Wired GOTO Equatorial Tracker with integrated PMC-Eight electronics suitable for attaching Small Telescopes or DSLR Cameras attached to a standard Vixen Style Dovetail Plate. Also a ST-4 compatible autoguider port for active tracking control is included. Use with the free ExploreStars App for Tablets (Windows, Android, iOS), or with the free ASCOM Standards Compliant POTH Client from Explore Scientific (either wired or wireless) to work with virtually any sky software that supports ASCOM. The iEXOS-100 utilizes a proven German equatorial mount design and Explore Scientific’s revolutionary PMC-Eight™ motion control system to flawlessly navigate the night sky and track objects as they journey across it. This combination provides superior observing and imaging performance without a prohibitive price tag.
GOTO systems play an important role in the world of amateur astronomy because they ensure users spend less time searching for particular objects and more time observing and imaging. The PMC-Eight with its versatile connections supported with free to download apps for Window, Android, and iOS, or through the free to download ASCOM POTH Client to connect to your favorite ASCOM Compliant Astronomical Software, can allow you to control the telescope from a few feet away or by communicating computer-to-computer with an Internet connection from virtually anywhere in the world. One of the standout features of the iEXOS-100 system is its German equatorial design. When it comes to tracking the stars with a telescope, there is nothing that compares to a German equatorial mount because it will follow objects as they rise in the east and set in the west. For observers, a German equatorial mount makes it easy to keep your celestial target in your eyepiece. For imagers, it helps you avoid common astrophotography pitfalls like field rotation.
Before you can track an object, you need to find it, and that objective can be daunting when you’re faced with a vast expanse of inky black sky. The iEXOS-100 puts a powerful GOTO system in your arsenal of astronomical tools that takes the frustration out of navigating the night sky. This integrated version of Explore Scientific’s PMC-Eight™ system transcends the industry standard single processor by utilizing eight CPUs that operate independently of one another to focus on defined functions. This delegation of tasks among the processors results in a system that offers superior responsiveness, efficiency, reliability and astoundingly fast timing intervals for seamless images and accurate tracking. Although it is internally complex, the GOTO system can be easily operated from your own Apple, Android or Windows tablet using the ExploreStars app, which has an intuitive nature that makes it simple and quick to align your telescope, navigate the stars and learn specifics about tens of thousands of celestial objects. This dynamic app is fueled by a database that is routinely updated to ensure it remains a relevant resource.
Our commitment to creating a streamlined GOTO mount is obvious in other design choices. The iEXOS-100 has locking clutches that will let you quickly reposition your telescope from one side to the other and an altitude knob for smooth height adjustments. The mount base includes a small polar alignment tunnel that allows users to roughly align their observing setup with Polaris. It also has a simple bubble level that comes in handy when stabilizing your tripod. Other features include a bracket for holding the battery pack, which powers the PMC-Eight system™ through 8 C batteries (not included); two 1 kg counterweights for balancing; and glow-in-the-dark markers on certain points of the mount and tripod so you can stay oriented with your setup at night. The mount is designed to hold up to 5 kg of astronomical equipment.IMPORTANT NOTETo start using ExploreStars app, download the free app and download the celestial data set that contains the astronomical catalogs, reference images, and reference text. Simply by unzipping the ExploreStars folder containing the expanded celestial data set into your Pictures directory, you will expand the native database from a thousand objects to over seventy thousand objects. SOFTWARE DOWNLOADhttps://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-systemFEATURESIntegrated Explore Scientific PMC-Eight™ Wifi GOTO systemBeautiful full graphical user interface using our very own ExploreStars OpenGotoWifi controlled by Tablet, Notebook or Desktop PC with 7'' or larger display, and Wifi function (computer device not included)Needed system software of optional computer or tablet: WIN8.1, WIN10+11, iOS, Android 4.4 or higherClassic four-button pattern and virtual joystick for guiding, centering, moving and slewing on the touch screenIntuitive 2 star and 3 star alignment procedure Includes a small polar alignment tunnelStandard Vixen Style Dovetail AdapterMount load capacity up to 5 kgMultiprocessor Micro Controller with 8 CPU´sMicro-Stepper Motors and worm gearsSilent Belt-Drive System Mini-USB port for INDI/ASCOM wired computer connectionST-4 compatible autoguider portINDI and ASCOM Driver available: YES, supports also Pulse-GuidingYOU can write your own code and import it into this softwareGPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phoneGlow-in-the-dark markings on mount and tripodWeight mount-head: 4,0 kg ; weight tripod: 2,5 kgSCOPE OF DELIVERYExplore Scientific iEXOS-100 PMC-8 Wifi Goto MountStainless steel tripod with bubble levelCounter weight 2 x 1,0 kg Battery compartment 12 volts with bracket / (8 x C-Cells not included) Coil-cord for DEC motorGlow-in-the-dark markings on mount and tripodExploreStars Software via download for freeInstruction manualIMPORTANT NOTE: This package doesn´t include any WINDOWS/iOS/Android Computer or Tablet.FAQ / KNOWLEDGE-BASE: https://explorescientificusa.com/pages/explore-scientific-knowledge-base-and-faqsPMC-Eight GROUPS: https://espmc-eight.groups.io/g/MAIN
BRESSER Twilight I telescope mount with tripod
€299.00*
The Twilight I is a light-to-medium-duty alt-azimuth mount with tripod designed to quickly and easily accept small to medium sized refractors, such as the AR102 + AR127s or ED102mm + ED127, and of course, the ED80mm. Lightweight, fast Newtonians will also match up nicely with the BRESSER Twilight I mount. As long as your telescope does not exceed 18 pounds and has a Vixen-Style Universal Dovetail bar for mounting the telescope to the mount head, you are good to go. The Twilight I alt-azimuth mount head is made of powder-coated aluminum and there are worm gears on both axes. The adjustable angle head can be tilted forward or back at a 45° angle to allow more clearance for your telescope so you can point it straight up for viewing at the zenith. The Allen hex wrench for doing the mount head adjustment can be safely stored at the integrated magnetic holder. Slow-motion control cables are attached on the vertical and horizontal axes, and are easy to turn during the night, even with gloves on, due to the over-sized knurled knobs that are attached to the end of each cable. They can be attached to either side of each axis to accommodate right or left-handed users, or different types of telescopes (e.g. refractors vs. Newtonian reflectors) for ease of adjustment. The stainless steel tripod that comes standard with the Twilight I mount has adjustable legs and a wide foot print of 42 inches, which makes the tripod more stable. A spreader bar locks against the inside of the legs to secure the tripod even further, and keep vibrations to a minimum. SCOPE OF DELIVERYTwilight I Telescope MountStainless Steel Field tripod
Vixen SXG Half Pillar for GP, AP & SX Mounts
€199.00*
For mounting a GP2, GPD2, SX or AP mount with 45mm base on the SXG or AP tripod.
Prevents long telescopic tubes from hitting the mount. FEATURES Suitable for SX, SXD2, SXP, GP2, GPD2, SKYPOD, HF2 GPD and GP mounts with 45mm connectorHeight 207mm Diameter 130mmWeight 1,8 kg SCOPE OF DELIVERY Half PillarAdjustable pivot for GP2, GPD2, AP and SX mounts
%
EXPLORE SCIENTIFIC EXOS-2 PMC-Eight GOTO Mount
€798.00*
€939.00*
(15.02% saved)
THE PMC-EIGHT GOTO SYSTEM JUST AWARDED A SKY AND TELESCOPE HOT PRODUCT FOR 2018. The Explore Scientific EXOS2-GT with PMC-8 Electronics is quite unique and special. Most of the serious amateur mounts on the market today offer single processors. The PMC-8 electronics are extremely robust. They include a 2-Channel Multi-Processor Micro-controller with 8 CPUs that run independently and are completely deterministic in their behavior, thus the name PMC-8. Within this multi-processor system is a 64 Kbyte EEPROM Non-Volatile Memory bank used to store parameters; a Wireless Ethernet 10/100 with full IP function which permits operation from anywhere using a browser, ASCOM, or APP over the web or serial port; and Non-Volatile Memory used to store user selected parameters. The electronics also includes an Auto-Guide port (ST4 contact input) and features the only wireless ASCOM driver on the market. The belt driven system uses 2 timing pulleys (1-45 groove and 1-10 groove) with fiberglass re-enforced neoprene belt connected to a Nema11 bi-polar stepper .67 amps 12ncm motor then connected to the worm. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds. The included battery pack (12 V) takes eight size "D" batteries. The head rests on a very tough and rigid stainless steel tripod with adjustable 2" legs from 26.8" to 42.5" and can support up to 28 lbs. of equipment. This system is all controlled from a tablet, notebook or desktop pc with 7" display and WIN8.1, WIN10+11, iOS or Android 4.4 with a beautiful full graphical user interface using our very own ExploreStars OpenGoto® Software. The ExploreStars OpenGoto® Software has the same basic functions as most all other mounts on the market today. ExploreStars is a free App downloadable from the Microsoft App store and GooglePlay. The basic download includes a standard 2 star or 3 star alignment procedure, over 70,000 star database, the Messier Catalog and Solar System objects. The software interface features a Classic four-button pattern for guiding, centering, moving and slewing on the touch screen of your tablet or phone. Pull-down menus open to offer the intuitive 2 star and 3 star alignment procedure, selection of the various catalogs, guided tours, the sync button, the park position, search feature and the coordinate input screen to enter RA and DEC coordinate information. Numerical key pad allows for selectable and user enterable GOTO speeds for slewing, centering and guiding rates. You can also set sidereal, king, lunar, solar, and user defined tracking rates. What makes this software different is that YOU can write your own code and import it into this software. Create a Messier challenge. Create a selectable list of objects you want to photograph and program that information into the software. With the ability to write your own code, you can create whatever your heart desires. Share it with the community of astronomers that are using this software.
In addition, this mount can be controlled by any ASCOM compliant software using the built-in wireless ASCOM driver. GPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phone.Here are most of the ASCOM software packages available for use with the Explore Scientific / Losmandy G-11 with PMC-8 mount: ACP; APT; AST / ATC & Ricerca (Omega Lab); AstroArt; AstroMB; Cartes du Ciel / Sky Chart; CCD AutoPilot; DeepSky; Deepsky Planner; DFM Engineering; Earth Centered Universe Pro; EasySky; Eye and Telescope; Project Pluto; Hallo Northern Sky; Maxim DL; MaxPoint; PinPoint Astrometric; Prism; Sequence Generator Pro; Sidereal Technology; The Sky; SkyMap Software; SkyTools 3; Star Atlas PRO; Sky Observer; StarryNight; Stellarium; Virtual Moon Atlas; and WorldWide Telescope.VIDEO REVIEW:https://youtu.be/tmNPajsd9H4 IMPORTANT NOTE: To start using ExploreStars app, download the free app and download the celestial data set that contains the astronomical catalogs, reference images, and reference text. Simply by unzipping the ExploreStars folder containing the expanded celestial data set into your Pictures directory, you will expand the native database from a thousand objects to over seventy thousand objects.SOFTWARE DOWNLOAD: https://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-systemFEATURESUnique PMC-8 Open Goto SystemBeautiful full graphical user interface using our very own ExploreStars OpenGotoWifi controlled by Tablet, Notebook or Desktop PC with 7" or larger display, and Wifi function (not included)Needed system software of optional computer or tablet: WIN8.1, WIN10/11, iOS or Android 4.4 or higherClassic four-button pattern and joystick for guiding, centering, moving and slewing on the touch screenIntuitive 2 star and 3 star alignment procedureMultiprocessor Micro Controller with 8 CPU´sMicro-Stepper Motors NEMA-11Highly accurate and silent Belt-Drive System ST-4 compatible autoguider portASCOM Driver available: YES, supports also Pulse-GuidingYOU can write your own code and import it into this softwareGPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phoneSCOPE OF DELIVERYExplore Scientific EXOS2-GT with Open GOTO PMC-8Stainless steel tripod with 2" legs and bubble levelCounter weight 2 x 4,5 kg Polefinder with illumination unitPower supply 12 volts / 2,0 ampereExploreStars Software via downloadIMPORTANT NOTE: This package doesn´t include any WINDOWS/iOS/Android Computer or Tablet.FAQ / KNOWLEDGE-BASE: https://explorescientificusa.com/pages/explore-scientific-knowledge-base-and-faqsPMC-Eight GROUPS: https://espmc-eight.groups.io/g/MAIN
Vixen SX2WL Equatorial GoTo Mount with Wifi Module
€1,799.00*
Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The
SX2WL mount is simply operated via a Wifi module with a smartphone or
tablet.
By controlling the mount with your smartphone using the free STAR
BOOK Wireless app, you can easily use sky navigation functions such as
automatic GoTo panning of celestial objects via your smartphone or
tablet.
By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to
20%, thus enabling longer astronomical observation and
astrophotography. When the desired celestial object is
selected from a list, it is automatically panned into the telescope's
field of view and tracking begins.An existing STAR BOOK TEN
controller can also be used on this mount without any problems.
Equipped with the same precision stepper motors as the top model, the
AXD mount, the SXD2WL brings a new standard of performance and precision
to the Vixen mount family. With a photographic load capacity
of 12 kg, the axis cross of the mount weighs just 7.0 kg (15.4 lbs) making it ideal for mobile observations.In addition, the motors
mounted in the lower part of the mount also serve as a counterweight,
so the mount requires fewer weights for balancing. The SX2 mount in detail Precision
stepper motors and micro-step motion control systemAt the heart of the SXD2 are the precision stepper motors, which offer
better performance and response than previous models. The micro-step
motion control system offers powerful and yet very smooth drive
characteristics, which are given both in fine movements and in fast
pans. Built-in bearings The bearings of the RA and DEC axes and the worm shafts have been
significantly improved to reduce the load on the motors. As a result,
the motors move much more smoothly than in previous models. High-precision worm gearsHigh-precision processing technologies eliminate worm gear errors. The
edges of the two worms and worm wheels are particularly smooth,
enabling very precise tracking. Declination axis as counterweightThe solid motor units are installed in the lower part of the declination
axis so that the center of gravity of the SXD2 is below the
intersection point of the RA and DEC axes. This means you need fewer
additional counterweights. Latitude setting The latitude is adjustable between 0 and 70 degrees (divided into 3
zones and adjustable +/- 15 degrees per zone, for high, medium and low
latitudes); latitude scale in 2-degree increments; fine adjustment with a
tangent screw head, approx. 0.8 degrees per turn. The wireless module in detail The
Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount
via a smartphone or tablet.
With the smartphone app STAR BOOK Wireless (free of charge) you can
navigate the sky without any cables.
The app turns your smartphone or tablet
into a control unit for the equatorial mount in no time at all.
The response delay of the mount, which is considered the biggest
disadvantage of wireless connections, has been reduced to a level
comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional
wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controllerThe STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller.
Depending on the star map setting, it contains up to 259,000 celestial objects.
Tap on a celestial object in the object list and start the GoTo.
The mount will now automatically move to this target and bring it into the telescope's field of view.
All the popular features of the STAR BOOK TEN are retained. Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As
there are no buttons, simply slide your finger over the star chart to
operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as
Messier objects, NGC objects and IC objects, this also includes the sun,
moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve
fairly precise positioning.
By aligning the mount to three or more stars, you can achieve
high-precision alignment of the mount for high magnifications.
The objects are then approached precisely and centrally in your telescope's field of
view.
The alignment information is saved and can be retained even when the
device is switched off.
By leaving the telescope in its current state after completing an
observation without moving it, you can start the automatic installation
with the same settings for the next observation. Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red,
autoguider and variable GoTo speed and LED brightness.
You can also set the timing of the reversal of the objective tube (meridian flip) as desired.
Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN.
It has a 6-pin 6-wire modular plug for external autoguider operation.
Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 12 kg, photographic, without counterweight Counterweight: 1x 1.9 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L), weight: 7.0 kg (15.4 lbs), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input: ST4 Power consumption SX2WL+Wireless unit: DC12V / 0.3-2.0 A (load 8 kg), 0.4-2.2 A (load 12 kg) SCOPE OF DELIVERYSX2WL EQ mount Wireless unit Counterweight: 1.9 kg (1pc) Mounting tools Cigarette lighter cable
EXPLORE SCIENTIFIC U-Mount with tripod for giant binoculars
€699.00*
Massive fork mount with excellent and adjustable mechanics for large binoculars with tripodWhen using giant binoculars, a stable mount and tripod with an appropriate load capacity is absolutely necessary. The new EXPLORE SCIENTIFIC U-mount with field tripod has been specially designed for the EXPLORE SCIENTIFIC BT series of giant binoculars, but also fits most other binoculars from 70 to 120mm lens diameter, which have a 1/4 inch photo thread connection on the underside. With the U-mount there is no shaking or annoying vibrations, the combination is as solid as a piece of iron and provides unlimited observation pleasure in all binocular adjustment positions. Whether you are observing the starry sky or the landscape, the U-mount is a solid base for your giant binocular and allows soft and smooth movements in both axes.The U-mount as a base for giant binoculars and always with you on every excursionAn easily transportable but solid mount is essential when using giant binoculars. A simple photo tripod with ball head or video tilt head is quickly overloaded here. The new EXPLORE SCIENTIFIC U-mount has an excellent mechanism with adjustable friction in both axes, and allows easy adjustment and tracking even when the load is fully utilised. Depending on the adjusted intensity of the friction, the binocular position is kept stable or a soft and smooth movement can be achieved. The large adjustment screws on both axes are smooth and easy to operate even with gloves and clammy fingers. Vibrations are reduced to an absolute minimum by the solid construction of the U-mount. Even at high magnification, there are no shakes and the finest details can be observed. The U-mount and tripod can be separated for easy transport.Mounting the large binoculars on the U-mountThe binoculars can be mounted and removed in a few seconds using the quick-release adapter plate included in the scope of delivery. This is a major advantage, especially for mobile outdoor use. The connection between binoculars and adapter plate is made by two 1/4 inch threaded bolts (standard photo tripod thread), which are variably guided in a slotted hole. A universal use with different binoculars is thus possible. The double screw connection guarantees a very secure fit of the binoculars. The adapter plate itself is also attached to the U-mount with the help of two large clamping screws, which are easy to use even when wearing gloves. Nothing wobbles here and all controls are easy to use.The field tripod provides a secure standNo matter what the surface, the EXPLORE SCIENTIFIC field tripod provides a safe stand. The solid aluminium and stainless steel construction effectively suppresses any kind of vibration. The large 50mm diameter stainless steel tripod legs and the aluminium tripod head plate are an ideal combination and offer maximum stability with a moderate transport weight of only 5.8kg. With applied and retracted tripod legs, the transport dimension is only 80cm long. The included accessory tray additionally gives some tension outwards to the tripod legs and thus to increase the stability. By pulling out the tripod legs, the working height for the binoculars can be individually adjusted within a range of approx. 100 to 140cm. FEATURESSolid fork mount with tripod for giant binocularsComfortable observation position in all orientationsExcellent mechanism for adjustment and tracking of the binocularSmooth and even movement of the binocularStepless friction adjustment in both axesLarge hand wheels for adjustment - no problem even with glovesSecure holding of the binocular in all adjustment positionsIdeal vibration damping thanks to the sturdy stainless steel tripodIntegrated accessory tray made of aluminiumCarries binoculars up to 12kg absolutely safelyAdjustment range vertical axis: 0 to 90 degrees Adjustment range azimuth axis: 360 degrees (without limitation)Maximum possible width of the binoculars: 290mmQuick change adapter plate with 2 x 1/4 inch photo thread screwsDouble prismatic clamping of the quick-change adapter plateSetting height of tripod with mounting: approx. 100 to 140 cmTripod leg tube diameter: 50 mmTransportation size tripod: ca. 80 cm lengthWeight mounting/tripod: 5.5 / 5.8kgMaterial mounting/tripod: aluminium / stainless steelShipping size/weight mount: 51x42x28cm, 7.6kgShipping dimensions/weight tripod: 87x21x22cm, 6.5kgSCOPE OF DELIVERYU-Mount with field tripodQuick change adapter plateAccessories trayInstruction manual
Vixen SXD2WL Equatorial GoTo Mount with Wifi
€2,799.00*
Vixen has developed a new generation of SX mounts for demanding observers and astrophotographers. The SXD2WL mount is simply operated via a Wifi module with a smartphone or tablet.
By controlling the mount with your smartphone using the free STAR BOOK Wireless app, you can easily use sky navigation functions such as automatic GoTo panning of celestial objects via your smartphone or tablet.
By eliminating the power consumption of the conventional LCD (STAR BOOK TEN), the power consumption on the mount is reduced by up to 20%, thus enabling longer astronomical observation and astrophotography. When the desired celestial object is selected from a list, it is automatically panned into the telescope's field of view and tracking begins. An existing STAR BOOK TEN controller can also be used on this mount without any problems.
Equipped with the same precision stepper motors as the top model, the AXD mount, the SXD2WL brings a new standard of performance and precision to the Vixen mount family. With a photographic load capacity of 15 kg, the axis cross of the mount weighs just 9.2 kg making it ideal for mobile observations. In addition, the motors mounted in the lower part of the mount also serve as a counterweight, so the mount requires fewer weights for balancing. The SXD2 mount in detail Precision stepper motors and micro-step motion control system At the heart of the SXD2 are the precision stepper motors, which offer better performance and response than previous models. The micro-step motion control system offers powerful and yet very smooth drive characteristics, which are given both in fine movements and in fast pans.
Built-in bearings
The bearings of the RA and DEC axes and the worm shafts have been significantly improved to reduce the load on the motors. As a result, the motors move much more smoothly than in previous models. High-precision worm gears
High-precision processing technologies eliminate worm gear errors. The edges of the two worms and worm wheels are particularly smooth, enabling very precise tracking.
Declination axis as counterweight
The solid motor units are installed in the lower part of the declination axis so that the center of gravity of the SXD2 is below the intersection point of the RA and DEC axes. This means you need fewer additional counterweights. Latitude setting
The latitude is adjustable between 0 and 70 degrees (divided into 3 zones and adjustable +/- 15 degrees per zone, for high, medium and low latitudes); latitude scale in 2-degree increments; fine adjustment with a tangent screw head, approx. 0.8 degrees per turn. Built-in PFL-II polar finder with illumination The built-in 5x20mm polar finder with 10° field of view has a 3-star alignment system.
This eliminates the inconvenience of setting the date and original time.
The illuminated reticle with variable brightness and automatic switch-off is adjustable in 8 levels and illuminated in red. The adjustment accuracy is 3 arc minutes. The wireless module in detail The Vixen Wifi adapter for EQ mounts allows you to control your Vixen mount via a smartphone or tablet.
With the smartphone app STAR BOOK Wireless (free of charge) you can navigate the sky without any cables.
The app turns your smartphone or tablet into a control unit for the equatorial mount in no time at all.
The response delay of the mount, which is considered the biggest disadvantage of wireless connections, has been reduced to a level comparable to wired connections. Reduced power consumption compared to conventional controllers with LCD monitor The power consumption of the mount is reduced by up to 20%, allowing longer observations than with conventional
wired controllers such as the STAR BOOK TEN. Operation similar to the STAR BOOK TEN controller. The STAR BOOK Wireless app has a similar structure to the STAR BOOK TEN controller.
Depending on the star map setting, it contains up to 259,000 celestial objects.
Tap on a celestial object in the object list and start the GoTo.
The mount will now automatically move to this target and bring it into the telescope's field of view.
All the popular features of the STAR BOOK TEN are retained Convenient operation When looking through the telescope operate the mount by swiping on the app's star chart. As there are no buttons, simply slide your finger over the star chart to operate the mount conveniently. Extensive astronomical data included In addition to data on easily observable celestial bodies such as Messier objects, NGC objects and IC objects, this also includes the sun, moon, planets, comets and dwarf planets. High-precision alignment By aligning the mount to one or two stars, you can already achieve fairly precise positioning.
By aligning the mount to three or more stars, you can achieve high-precision alignment of the mount for high magnifications.
The objects are then approached precisely and centrally in your telescope's field of view.
The alignment information is saved and can be retained even when the device is switched off.
By leaving the telescope in its current state after completing an observation without moving it, you can start the automatic installation with the same settings for the next observation. Individual setting options As with the STAR BOOK TEN control unit, the app offers various individual settings, such as gear backlash compensation, night mode in red,
autoguider and variable GoTo speed and LED brightness.
You can also set the timing of the reversal of the objective tube (meridian flip) as desired.
Even if the object moves to the south during tracking, you can prevent the telescope tube from reversing. Important note: Cannot be used on old SX mounts with the old blue Star Book! Technical information about the Wifi module: CPU with 32-bit CISC processor 120 MHz
The unit is connected to the mount via a D-SUB 9PIN connector as with the STAR BOOK TEN.
It has a 6-pin 6-wire modular plug for external autoguider operation.
Supported operating systems are Android 6 or higher, iOS 9.0 or higher, WLAN standard: IEEE 802.11b/g/n. FEATURESRA sprocket: 180 teeth DEC sprocket: 180 teeth Shaft material and diameter: Carbon steel / Decl. 35 mm, RA 40 mm thickness Polar finder scope: 6x20 mm, PFL-II polar finder Fine height adjustment: 0° to 70°, (fine adjustment +/- 15°, height) Backsight rod: 20 mm diameter Azimuth adjustment: worm fine adjustment Power supply: DC12 V; 0.4~1.7 A Maximum load: 15 kg, photographic, without counterweight Counterweight: 1x 1.9 kg and 1x 3.7 kg Tripod connection: 45 mm spigot Dimensions: 36 cm (H) x 12 cm (W) x 36 cm (L)
Weight: 8.8 kg (19.4 lb), without counterweight 32-bit CISC processor 120 MHz Operating system: Android 6 or higher, iOS 9.0 or higher Connection: D-SUB 9PIN connector Autoguider input ST4 Power consumption SXD2WL+Wireless unit: DC12V / 0.3-2.0 A (load 10 kg), 0.4-2.2 A (load 15 kg) SCOPE OF DELIVERYSXD2WL EQ mount Wireless unit 2 counterweights: 1.9 kg and 3.7 kg Mounting tools Pole finder PFL-II Cigarette lighter cable
%
BRESSER Messier EXOS 2/EQ-5 Mount
€375.69*
€469.00*
(19.9% saved)
Mount and Tripod. The BRESSER EXOS 2 is a rugged mount with high rigidity and precision tracking for visual observation and astrophotography. The tripod is extremely rigid to suppress vibrations really well. This model is very well machined and has an illuminated polar finder scope and precise graduated circles. A powered twoaxis control (BRESSER Exos Duo) or a GoTo-Kit is available as an optional extra. The BRESSER EXOS 2 can take the weight - depending on length and use of up to 13 kg. This allows you to use refractors of up to 152 mm aperture and mirror telescopes of up to 203 mm aperture.CHARACTERISTICS
Stable parallactic mount with fine drive in both axes
Ball bearings in both axes for more precise movements
Stable height adjustable stainless steel tripod (min. 69 cm / max. 109,5 cm )
Load capacity up to 13 kg payload
Retrofittable with the BRESSER Star Tracker Goto Kit ( item no. 4951750 )
Circular bubble for easy horizontal alignment
Pole height scale for setting the latitude
Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software
Pole finder scope with optional illumination ( item no. 4964212 )
Tripod weight: 4.7 kg
Mount weight: 5.6 kg (without counterweight)
Total weight incl. counterweight: 14.8 kg
Batteries: not included
SCOPE OF DELIVERY
BRESSER EXOS-2 mount
Adjustable polar finder scope with optional illumination
Stainless steel tube field tripod with accessory tray
1x 4.5 kg counterweight
%
BRESSER Messier EXOS-2 EQ GoTo Mount
€719.20*
€899.00*
(20% saved)
BRESSER EXOS-2 GoTo Equatorial Mount. Mount, tripod and hand box with computer. This German mount has tracking motors in both axes that follow celestial objects very precisely.The handbox with GoTo works reliable and controls the mount in every situation. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds.The battery pack (12 V) is conveniently fastened to the tripod shelf and takes eight size "D" batteries.The mount rests on a very tough and rigid stainless steel tripod and can take optical tubes of up to 13 kg. GOTO - Stargazing at the push of a button! The Startracker GoTo System enables beginners to start astronomical observations in just a few minutes, and guides you to objects that are hard to localize through a standard finder scope.Just push the button and the GoTo System will find planets, nebulae or galaxies for you and position your telescope automatically and precise.The GoTo System database includes thousands of astronomical objects.The Messier mount with GoTo System allows you to observe without tedious searching, or image faint objects that are hard to find in a standard finder scope.The BRESSER StarTracker GoTo systems uses servo motors for both axes and features an ST-4 compatible autoguiding input. Guiding aggressivity can be set on the mount itself. The menu navigation of the Startracker Handbox is also multilingual and offers the settings of German, English, French, Spanish and Italian.CHARACTERISTICS MOUNT
Stable parallactic mount with fine drive in both axes
Ball bearings in both axes for more precise movements
Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm )
Load capacity up to 13 kg payload
Circular bubble for easy horizontal alignment
GoTo Mount with motors and hand box controller, for easy finding and guiding moon, planets, stars and much more
ST-4 compatible autoguider interface
Pole height scale for setting the latitude
Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software
Pole finder scope with optional illumination ( item no. 4964212 )
Tripod weight: 4.7 kg
Mount weight: 6.7 kg (without counterweight)
Total weight incl. counterweight: 15.9 kg
Batteries: not included
SCOPE OF DELIVERY
Equatorial EXOS 2 GOTO mount with stainless steel tripod and Startracker handcontroller
Adjustable polar finder scope with optional illumination
Stainless steel tube field tripod with accessory tray
1 x 4.5 kg counterweight
%
BRESSER Messier EXOS 1/EQ-4 Mount
€263.20*
€329.00*
(20% saved)
Mount and Tripod. The BRESSER Messier beginners series of telescopes. Within this series you find smaller optics mounted stable on the new BRESSER EXOS 1 mount. This combination means more value for money and puts an end to flimsy beginners scopes which discourage most of the beginners due to small, under engineered mounts. The EXOS 1 with a robust stainless steel tripod bears optical tubes weighing up to 7kg stable for visual observation. The optional motor drive for the RA axis makes usage even more comfortable, so there is no need of manual tracking and the object is kept steadily in the field of view.FEATURES
Stable parallactic mount with fine drive in both axes
Circular bubble level for easy horizontal alignment
Stable height-adjustable stainless steel tripod
Retrofittable with a tracking motor for the right ascension axis
Pole height scale for setting the latitude
Scaled graduated circular rings for easier finding of objects by means of star atlas or planetarium software
Tripod weight: 4.7 kg
Mount weight: 4 kg (without counterweight)
Total weight incl. counterweight: 13.2 kg
SCOPE OF DELIVERYEXOS 1 German equatorial mountstainless steel tube field tripod1 x 4.5 kg counterweight
Vixen AP-SM Mount with RA Motor Module and Star Book One Controller
€1,299.00*
The AP-SM mount is an enhancement of the AP mount. Unlike the AP mount, it has an RA motor and is equipped with the STARBOOK ONE controller.
The AP mount provides a secure, stable support for your telescope.
Thanks to the slip clutch mechanism, the mount can be adjusted quicky to the target object.
There is a wide range of optional accessories. The ADVANCED POLARIS mount is ideal for both beginners and advanced observers who require a lightweight travel mount.
STYLISH DESIGN
The AP mount features an ultra-smooth finish without any projecting parts.
Simply place your telescope on the mount and move it to the desired celestial object without having to loosen any clamps!
QUICK POLAR ALIGNMENT
The slip clutches allow you to adjust the telescope to your target object easily – no more searching for adjustment clamps in the dark! An optional polar meter is available, which enables you to locate the celestial pole when it is hidden by trees or buildings.
OPTIONAL POLAR FINDER SCOPE
The innovative polar finder scope provides a new way to polar align your telescope. Simply align the stars in the crosshair reticle with the same stars in the night sky. Polar alignment is achieved using 3 reference stars. The polar finder is illuminated to facilitate orientation and switches off automatically after 3 minutes to save battery power.
POWER SUPPLY
The RA and DEC motor modules are powered by four AA alkaline, Ni-MH or Ni-CD batteries. The RA motor module has a USB Micro-B port for an external power supply. A USB power pack or car charging cable can be used for longer observation sessions.
STAR BOOK ONE CONTROLLER
The STAR BOOK ONE is a multifunctional and intuitive controller that tracks in the RA and DC axis with a range of different speeds. The tracking options are designed for time-lapse cameras at a wide range of speeds, including sidereal, lunar and solar rates. The controller also offers many useful functions such as backlash compensation, autoguider port, PEC and a built-in red LED light.
FEATURES
R.A. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth
DEC. Worm wheels: 58.4 mm Ø gear wheel with 140 teeth
Azimuthal adjustment: Twin adjusting screws
Altitude adjustment: Twin adjusting screws
Number of ball bearings: 7
Polar finder: Optional
Motor: RA stepper motor
Tracking: STAR BOOK ONE (max. 60x Slewing)
Power supply: USB Micro-B
Counterweight bar: 20 mm
WHAT’S INCLUDED
AP-SM mount
1.0 kg counterweight
STARBOOK ONE controller
BRESSER StarTracker Astronomical Photo Mount Kit
€589.00*
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort? The BRESSER StarTracker Astronomical Photo Mount Kit is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. This set contains all the components required for a quick and comfortable entry into the world of astrophotography with the exception of a camera and objective lens: A stable BRESSER tripod TP-100 DX with carrying bag, the BRESSER Micro Motion Head MH-100 (polar-wedge), the BRESSER Polar Finder Scope for StarTracker PM-100 and of course the BRESSER StarTracker astrophoto mount PM-100 with ball head.Which cameras are basically suitable for use with the BRESSER photo mount? All cameras with 1/4'' (6.3mm) tripod connection thread and bulb length B for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the delievered optical Polar Finder Scope, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated Polar Finder Scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. Typically achievable exposure times with good tracking accuracy are: 16mm wide-angle lens: 5 minutes (300 sec.) , 100mm telephoto lens: 1 minute (60 sec.) FEATURES StarTracker Astronomical Photo Mount Kit Equatorial StarTracker Photo-MountAutomatic siderial tracking against the Earth rotation Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4'' Photo thread for Kamera mountingPhoto-Mount with 1/4'' threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.) Battery life: up to 20 hours Weight Photo-Mont: 0.63kgTransport weight incl. complete accessories: 3.6 kg Adjustment height mount with tripod: 80-155cm Tripod transport dimensions: 60x10x10cm; tripod weight: 2,1 kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) SCOPE OF DELIVERY BRESSER StarTracker astronomical Photo-Mount PM-100BRESSER Ballhead with quick release saddle plateBRESSER Polar Finder Scope for StarTracker PM-100BRESSER Micro Motion Head MH-100 (Polar-Wedge)BRESSER Tripod TP-100 DX with carry bag User manual
BRESSER Nebula EXOS-2 EQ Goto Mount
€1,295.00*
Discover the possibilities and forge new paths with the Nebula EXOS-2 Goto Mount!Mount and TripodThe BRESSER EXOS-2 is a stable mount with a high load capacity and precise tracking for visual observations and astrophotography. Double radial groove ball bearings in both axes ensure precise, smooth motion, and the RA axis bearing has been optimized to reduce backlash. Additionally, the tripod is reinforced to further suppress vibrations. The BRESSER EXOS-2 can be loaded with up to 13 kg of optics for purely visual use depending on the length and purpose!Nebula: the powerful and flexible Goto systemWith the new Nebula Goto system, set off for new astronomical shores. This system offers several control options. You can operate the mount directly via its own Nebula control interface using your smartphone or tablet (iOS and Android supported). Alternatively, you can also use a planetarium software such as SkySafari. Manual control remains an option as well. For this, a hand box for minor corrections or simple control commands is included.Furthermore, with the BRESSER Nebula Goto Kit, you can connect your laptop or PC directly via WIFI or LAN cable (recommended for faster data transfer) to the Nebula control unit. This not only gives you full control over the mount but also allows you to connect various devices such as cameras, motor focus, filter wheels, etc. directly to the control unit via various USB ports. This eliminates the need to connect each device to your computer via cables. The pre-installed program KStars / EKOS lets you comfortably control all devices from your PC or laptop. Electronic polar alignment or guiding can also be easily achieved with the Goto Kit, provided you have a camera connected. You are also not limited to the software of the Nebula control unit. Thanks to the installed ASCOM Alpaca driver, you can use your own programs on your computer to control the mount - whether it's Stellarium or N.I.N.A. The two stepper motors with a belt drive ensure a smooth, direct drive of the two axes. It's only important to have a good balance.
FEATURES EXOS-2 MOUNT
Stable parallactic mount with fine drive in both axes
Ball bearings in both axes for more precise movements
Sturdy height-adjustable stainless steel tripod (Min. 69 cm / Max. 109.5 cm)
Load capacity of up to 13 kg
Spirit level for easy horizontal alignment
Polar height scale for setting the latitude
Polar scope with optional lighting (item no. 4964212)
Tripod weight: 4.7 kg
Mount weight: 5.6 kg (without counterweight)
Total weight including counterweight: 14.8 kg
Batteries: not included
FEATURES GOTO SYSTEM
Belt drive for a more precise, quieter tracking
Stepper motors with high resolution (0.36´/microstep)
Hand control box for direct control of the mount
Virtual hand control box for smartphones and tablets
PC control – ASCOM compatible
USB ports for cameras, motors, filter wheels etc.
SCOPE OF DELIVERY
BRESSER EXOS-2 Mount
Polar finder scope with optional illumination
Stainless steel field tripod with accessory tray
1x 4.5-kg counterweight
2 stepper motors for the axes (RA and DEC)
Raspberry Pi control unitBasic handbox
230V / 12V / 3 A power adapterConnection cableManual for download
Vixen AP mount base
€119.00*
The Vixen AP mount base is used to convert the AP and AP-SM mount to a full APZ altazimuth mount.If you already own an AP or AP-SM mount, the parallactic mounts can be converted into an APZ mount with 8 kg load capacity in just a few steps. Thanks to the modular mounting system, any existing motor modules with controls can also be used.
The AP mount base has the same connection thread as your AP mount and can therefore be used on the same tripods.FEATURESAllows the conversion of the AP and AP-SM to the APZ mount Same tripod connection as the AP mounts
Allows 8 kg load capacityConverted in a few simple steps
SCOPE OF DELIVERYVixen AP mount base
Assembly tool
Vixen Mobile Porta Mount Head
€139.00*
The Vixen Mobile Porta mount head without a tripod is a small, portable travel mount for quick observations that does not require elaborate setup. The head can be attached to a standard photo tripod with 1/4- or 3/8-inch photo thread.Thanks to its new, compact design and low weight, the mount is ready to use in just a few steps and is very portable. In addition, the new multi-arm
can be adjusted from different angles, allowing for comfortable viewing
at the zenith, even with longer telescopes. In addition to these new
features, the mount of course includes the proven features of the Porta series, such as slip clutch and fine movement in both axes.Easy Adjustment
The telescope can be freely moved by hand in all directions and
automatically holds its position thanks to the slip clutch. This
allows for quick and easy adjustment to the
observation object. The new multi-arm can be adjusted from different angles allowing for
a comfortable observation at the zenith, even with longer telescopes. It
can be adjusted in 15-degree increments. Moreover, the
multi-arm system allows the mount to be folded compactly for
transport.Vixen Dovetail Standard MountingLike all Vixen mounts, the Mobile Porta mount offers the Vixen world-standard dovetail adapter for telescope attachment. The telescope is simply clamped in the dovetail guide. The Mobile Porta mount is recommended for telescopes up to max. 3.5 kg.FEATURESLightweight telescope mount for quick observationBuilt-in slip clutch and fine movement in the axesUsable on standard photo tripodsThe multi-arm can be adjusted from different anglesLoad capacity: 3.5 kgWeight: 1.1 kgSCOPE OF DELIVERYMobile Porta mount headWorm gears for fine adjustment
%
Vixen AP-Z azimuthal Mount with Slip Clutch
€544.00*
€679.00*
(19.88% saved)
Simple force of friction keeps the telescope in place.
Easily direct the telescope to your desired celestial object without loosening a screw.
The friction automatically holds the telescope in position.
The AP mount provides a secure, stable support for your telescope.
Thanks to the slip clutch mechanism, the mount can be quickly adjusted to the target object.
There is a wide range of optional accessories.
FEATURES
Azimuthal telescope mount with manual fine adjustment
Easy to use and quick to install
Designed for telescopes up to 8 kg
WHAT'S INCLUDED
Mount
Wheel for fine adjustment