Adapter T2 to 2", for 2" eyepieces to blocking filter
- T2 thread on telescope side and 2'' eyepiece connection
- Enables use of 2'' eyepieces on Lunt telescopes/filters
Product number:
0554210
GTIN/EAN:
4007922035628
WEEE-Reg.-Nr.:
DE 34716369
Mit BRESSER gelingt ein angenehmer Einstieg in die große Welt der Astronomie. Unsere ausführlichen Informationen ("Teleskop-Fibel") geben wertvolle Einsteiger-Tipps - aber auch erfahrene Astronomen können unsere bereitgestellten Informationen (z. B. Tabellen für die geographische Breite aller größeren Weltstädte) als Nachschlagewerk benutzen.
Hier das Inhaltsverzeichnis der großen BRESSER Teleskop-Fibel:
Mit BRESSER gelingt ein angenehmer Einstieg in die große Welt der Astronomie. Unsere ausführlichen Informationen ("Teleskop-Fibel") geben wertvolle Einsteiger-Tipps - aber auch erfahrene Astronomen können unsere bereitgestellten Informationen (z. B. Tabellen für die geographische Breite aller größeren Weltstädte) als Nachschlagewerk benutzen.
Hier das Inhaltsverzeichnis der großen BRESSER Teleskop-Fibel:
- 2. Der Blick in den Sternenhimmel
- 2.1 Beobachten mit bloßem Auge
- 2.1.1 Sternbilder mit dem bloßen Auge beobachten
- 2.2 Beobachten mit dem Fernglas
- 2.2.1 Planeten und Monde mit dem Fernglas beobachten
- 2.2.2 Deep Sky-Objekte mit dem Fernglas beobachten
- 2.2.3 Aller Anfang ist leicht
- 2.3 Beobachten mit dem Teleskop
- 2.4 Der Mond
- 2.4.1 Die Mondphasen
- 2.4.2 Die uns abgekehrte Seite des Mondes
- 2.4.3 Die Mondkarte
- 2.4.4 Maria (Meere)
- 2.4.5 Mare
- 2.4.6 Krater
- 2.4.7 Die Strahlenkrater
- 2.5 Das Planetensystem mit dem Teleskop beobachten
- 2.5.1 Wo sind die Planeten?
- 2.5.2 Planetenbeobachtung
- 2.5.3 Stellung der Planeten zur Sonne
- 2.5.4 Die Planeten stellen sich vor
- 2.5.5 Deep Sky-Beobachtung mit dem Teleskop
- 2.6 Praktische Beobachtung Tipps und Tricks
- 2.6.2 Tipps für die optimalen Beobachtungsbedingungen
- 2.7 Die schönsten Objekte rund um das Jahr
- 4. Teleskope
- 4.1 Das Teleskop als Beobachtungsinstrument
- 4.2 Optik
- 4.2.1 Refraktor (Linsenteleskop)
- 4.2.2 Reflektor (Spiegelteleskop)
- 4.3 Mechanik
- 4.3.1 Azimutale Montierung
- 4.3.2 Parallaktische Montierung oder Äquatorialmontierung
- 4.3.3 Nahführmotoren
- 4.4 Zubehör
- 4.4.1 Okulare
- 4.4.2 Wichtige Tipps zur Okularauswahl
- 4.4.3 Filter
- 4.4.4 Fotografisches Zubehör
- 4.4.5 Sonstiges Zubehör
- 5.1 Welches Teleskop für wen?
- 5.1.1 Deep-Sky Beobachtungen
- 5.1.2 Nähere Planeten beobachten
- 5.1.3 Thema Transportierbarkeit
- 5.1.4 Preisfaktor beim Teleskopkauf
- 6. Nützliche Tabellen
- 6.1 Tabelle für die geographische Breite aller größeren Weltstädte
- 6.1.1 Beobachter auf der Nördlichen Erdhalbkugel (N):
- 6.1.2 Beobachter auf der Südlichen Erdhalbkugel (S):
- 6.2 Aufsuchtabelle für markante Sterne
- 6.3 Mit dem Universum auf Du und Du - oder: Entfernungen im Weltall
Product information "Adapter T2 to 2", for 2" eyepieces to blocking filter"
Adapter T2 to 2", takes for example 2" eyepieces to Lunt Solar Systems blocking-filters.
For example you want to use your 2" eyepieces at Lunt Solar Systems telescopes or filters? All you need is this adapter. Simply remove the 1.25" eyepiece tube from your blocking-filter, and thread on this 2" adapter. It takes T2 threading to a 2" eyepiece tube.
You can use 2" eyepieces with this adapter at:
• LUNT H-alpha telescopes (not at LS35THa!)
• the blocking-filters of LUNT H-alpha filter systems
Technical data:
• Thread at telescope-side: T2 female thread
• Eyepiece connection: 2"
Delivered by order:
• Adapter T2 to 2"
(Blocking Filter not included)
This adapter offers a T2 female thread at the telescope-side, and a 2" connection at the eyepiece-side.
You can use 2" eyepieces with this adapter at:
• LUNT H-alpha telescopes (not at LS35THa!)
• the blocking-filters of LUNT H-alpha filter systems
• LUNT Ca-K modules
• all telescopes/adapter with T2 male thread
Technical data:
• Thread at telescope-side: T2 female thread
• Eyepiece connection: 2"
Delivered by order:
• Adapter T2 to 2"
(Blocking Filter not included)
| Colour: | black |
|---|---|
| Material: | Aluminium |
Similar products
LUNT Blue-Glass 20mm for B400 to B1800 blocking-filters
€15.00*
Spare part for blocking-filters from LUNT SOLAR SYSTEMS, suitable for B400, B500, B600, B1200 and B1800 blocking-filters.The H-alpha telescopes and filter systems from Lunt Solar Systems each include a blocking-filter. The blocking-filters have a blue colored filter part on the side facing the telescope. This blue colored filter parts may become a milky white layer at older blocking-filters if the blocking-filter was storded at high air humidity for some time. Please always store H-alpha telescopes and filters as dry as possible. If this blue colored filter part has become a milky white layer, it can be replaced with this spare part. The replacement is easy and can be done by the user himself. Installation instructions can be found here under the "Manuals" tab as a PDF for download.Please note that this replacement part can only be used on Lunt Solar Systems blocking-filters B400 to B1800. If the problem happens with the large B3400 blocking-filter, the B3400 must be sent to our service department for repair.FEATURESDiameter: 20mmCannot be used separately, only as spare part at blocking-filters from Lunt Solar SystemsFor B400, B500, B600, B1200 and B1800 blocking-filtersIt does not matter if the blocking-filters are installed in 90° zenith-mirrors or straight extension-tubesSCOPE OF DELIVERYSpare part 20mm blue glass for B400 to B1800 blocking-filters
LUNT O-ring 34mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 34mm inner diameter and 42mm outer diameter.If you need the smaller O-ring with 32mm inner diameter and 40mm outer diameter, this is the spare part with item number 0558330.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 34mmOuter diameter: 42mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 34mm inner diameter and 42mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT O-ring for Pressure-Tuner at LS50THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of LS50THa H-alpha solar telescopes from LUNT SOLAR SYSTEMSA rubber O-ring is installed into the Pressure-Tuner of Lunt Solar Systems LS50THa solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-ring can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, the old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF for download.After replacing the O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under part number 0558350.Please note that this spare part can only be used on the Lunt Solar Systems LS50THa H-alpha solar telescopes. If the problem occurs on the larger THa or MT series telescopes, the larger O-rings with part numbers 0558330 or 0558340 must be used there.FEATURESInner-diameter: 31mmOuter-diameter: 39mmCannot be used separately, only as a replacement part on the Pressure-Tuner of the LS50THa telescopes from Lunt Solar Systems.It does not matter what blocking filter is at the LS50THaSCOPE OF DELIVERYSpare part one O-ring for pressure tuner of LS50THa
LUNT Grease for Pressure-Tuner at MT & THa solar telescopes
€2.50*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSFor example, if the O-rings have been changed on a Pressure-Tuner of a Lunt Solar Systems H-alpha solar telescope, the Pressure-Tuner can be re-greased with this grease. The grease can be applied to the piston with the O-rings and to the threads of the brass cylinder on the Pressure-Tuner. It keeps the Pressure-Tuner running smoothly and seals it.Please note:Do not use too much grease inside the brass cylinder. The grease must not get into the air passage at the bottom of the brass cylinder, otherwise the Etalon could be damaged in the worst case.FEATURESLithium grease with Teflon contentVery good sealing propertiesHigh adhesion and good corrosion protectionTemperature stable from -20 to +120° CelsiusConstant viscosity during temperature fluctuationsSCOPE OF DELIVERYSpare part: Grease for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT LS300PS Dovetail Bar 300mm (GP level)
€113.00*
This dovetail plate with 300mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.Technical data:• Length: 300mm• Width: 44mm• Distance between screws: 35mm• Screws thread: 1/4"-20Delivered by order:• 1 x 300mm dovetail plate• 2 x 1/4"-20 screws
LUNT LS7-21ZE Zoom Eyepiece 7.2mm - 21.5mm
€299.00*
Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm
LUNT O-ring 32mm for Pressure-Tuner at MT & THa solar telescopes
€5.00*
Spare part for Pressure-Tuner of MT and THa series H-alpha solar telescopes from LUNT SOLAR SYSTEMSTwo rubber O-rings are installed into the Pressure-Tuner of Lunt Solar Systems solar telescopes to seal the air-pressure tuning system. Over time, the rubber of this O-rings can age and become porous, whereby the air-pressure can then no longer be maintained. When this happens, a old O-ring can be replaced by this spare part. The replacement is simple and can be done by the user. Installation instructions can be found here under the tab "Manuals" as a PDF file for download.Please be sure to note:Depending on the production series, the diameters of the Pressure-Tuner pistons can vary slightly. There are pistons for O-rings with 32mm inner diameter and 40mm outer diameter, and pistons for O-rings with 34mm inner diameter and 42mm outer diameter. Please check the diameter of your old O-rings, this spare part is an O-ring with 32mm inner diameter and 40mm outer diameter.If you need the larger O-ring with 34mm inner diameter and 42mm outer diameter, this is the spare part with item number 0558340.The LS50THa telescopes have Pressure-Tuners with smaller diameters, for these you will need replacement O-rings with item number 0558320.After replacing a O-ring, the piston and cylinder of the Pressure-Tuner can be re-greased with grease available under item number 0558350.FEATURESInner diameter: 32mmOuter diameter: 40mmCannot be used separately, only as a replacement part on the Pressure-Tuner of MT and THa telescopes from Lunt Solar Systems.It does not matter what blocking-filter is at the MT or THa telescope.SCOPE OF DELIVERYSpare part one O-ring with 32mm inner diameter and 40mm outer diameter for Pressure-Tuner of MT and THa H-alpha solar telescopes from Lunt Solar Systems
LUNT Sol Searcher
€49.00*
Sol-Searcher for installing on all solar telescopes of Lunt Solar Systems. The tube rings of the LUNT solar telescopes are prepared for the mounting of this Sol-Searcher."I can't find the Sun!" sounds funny. However, the Sun is tricky to find in a properly filtered telescope, and you don't ever want to chance a direct gaze, let alone a magnified image of it.This Sol-Searcher is the safe and easy way to find the Sun. It is absolutely safe since you don't look through Sol-Searcher, you look at it. The aperture acts as a "pinhole" which projects an image of the Sun on to the 1/4" translucent "screen." This screen can be viewed from either side. Simply move your scope until the Sun's image is centered on the screen and the Sun will be in the eyepiece's field of view.The solar telescopes from Lunt Solar Systems are fitted for installing this Sol-Searcher. Only at the LS130MT and LS152THa telescopes the additionally adapter 0554302 will be needed.SCOPE OF DELIVERYTeleVue Sol-SearcherScrewsHexagon wrench
LUNT B600d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
€699.00*
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 540mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B600d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B600d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 540mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 6mmUsable at telescopes up to 540mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B600d1 in 90° star-diagonal for 1.25 inch focuser
LUNT 1.25" Slide-Tube for blocking filters
€48.00*
1.25" slide-tube, adapts Lunt Solar Systems 2" blocking-filter in star diagonal to telescopes with 1.25" focuser.FEATURESThread to blocking-filter: T2Length 1.25" slide-tube: 28mmSCOPE OF DELIVERYAdapter 2" LUNT Blocking Filter to 1.25" focuser(Blocking-filter not included)
LUNT B1200d1 Blocking-Filter in 1.25 inch zenith mirror diagonal
€1,299.00*
Blocking-filter in 90° zenith mirror diagonal, for telescopes up to 1080mm focal length, and with 1.25 inch (31.7mm) focuser. Can only be used together with a LUNT H-alpha filter, or with a LUNT H-alpha telescope!Lunt Solar Systems offers blocking-filters in different sizes, and alternatively in 90° star-diagonal housings or straight extension tubes. You can choose what blocking-filter you will use at your LUNT H-alpha Etalon system.The B1200d1 is installed in a 90° star-diagonal housing, for 1.25 inch (31.7mm) focuser on the telescope side, and with T2 thread and 1.25 inch eyepiece connection on the eyepiece side. The B1200d1 can be used at LUNT H-alpha systems, if the used telescope has a 1.25 inch focuser and up to 1080mm focal length.The blocking-filter can not be used without additional H-alpha filter system from Lunt Solar Systems! Blocking-filters are absolutely required for the safety and performance of H-alpha telescopes for solar observing. Lunt Solar Systems blocking-filters contain a unique filter system. We can only warranty safety or performance, if blocking-filter is paired with a H-alpha filter or H-alpha telescope of Lunt Solar Systems.At the tab "Accessories" you will find H-Alpha telescopes and filters with which this blocking filter can be combined.FEATURESBlocking-filter only usable at additional H-alpha filter systemFilter diameter: 12mmUsable at telescopes up to 1080mm focal90° star-diagonal housing1.25 inch slide tube for 1.25 inch focuserConnection for 1.25 inch eyepiecesT2 thread for camera connectionSCOPE OF DELIVERYBlocking-filter B1200d1 in 90° star-diagonal for 1.25 inch focuser
LUNT 2" Slide-Tube for blocking filters
€48.00*
2" slide-tube, adapts LUNT Solar Systems 1.25" blocking-filter in star diagonal to telescopes with 2" focuser.FEATURESThread to blocking-filter: T2Length 2" slide-tube: 80 mmSCOPE OF DELIVERYAdapter 1.25" LUNT Blocking Filter to 2" focuser(Blocking-filter not included)
Customers also bought
BRESSER T2 Extension Tube Set
€29.00*
Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2 plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or RitcheyChrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter
%
BRESSER Adapter 2" on T2
€13.00*
€24.90*
(47.79% saved)
Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.
Customers also viewed
EXPLORE SCIENTIFIC 82° Ar Eyepiece 4,7mm (1,25")
€165.00*
Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics.
The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves.
All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
BRESSER Universal Smartphone Adapter Deluxe
€21.09*
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone
LUNT LS130TBP&F conversion kit for LS130MT
€598.00*
The LS130MT/B3400 telescopes can be upgraded with this conversion kit. This allows to explore the Sun at different wavelengths with one and the same telescope, and the telescope can also be used for observing and photographing the starry night sky.You can replace the H-Alpha system of the LS130MT/B3400 telescope with this conversion kit in just a few easy steps. This makes it possible to observe the sun in H-alpha, in the light of the Calcium-K wavelength, or in White-Light - with one and the same telescope!You will only need the additional Ca-K module for LS130MT (item number 0551697), or a LUNT Herschel-wedge (item number 0558201 or 0558211).But there is more: With this conversion kit the LS130MT/B3400 can also be used as a 3-lens apochromatic telescope for astronomical observations and photography at night!This conversion kit turns the LS130MT into a real all-round telescope!This conversion kit was specially designed for the LS130MT/B3400 H-Alpha telescope. Included is a completely new focuser. Simply loosen three knurled screws at the LS130MT/B3400, which hold the H-Alpha unit together with the focuser. Here the new focuser will be fixed, and you have already made your LS130MT a adequate triplet ED apochromatic telescope.This conversion kit can also be used at the LS130MT/B1200 and LS130MT/B1800 telescopes, but it is not necessary there. This conversion kit is only necessary at the LS130MT/B3400, because at this telescope the blocking filter is fix installed inside the focuser.SCOPE OF DELIVERY2" Focuser with 10:1 reduction and adapter to LS130MT telescopeInstruction manualLS130THa telescope not included! Can only be used together with an LS130MT solar telescope.Also available as set together with Ca-K module for LS130MT (item number 0551695)